Vulkan Logo

5. Devices and Queues

Once Vulkan is initialized, devices and queues are the primary objects used to interact with a Vulkan implementation.

Vulkan separates the concept of physical and logical devices. A physical device usually represents a single complete implementation of Vulkan (excluding instance-level functionality) available to the host, of which there are a finite number. A logical device represents an instance of that implementation with its own state and resources independent of other logical devices.

Physical devices are represented by VkPhysicalDevice handles:

// Provided by VK_VERSION_1_0
VK_DEFINE_HANDLE(VkPhysicalDevice)

5.1. Physical Devices

To retrieve a list of physical device objects representing the physical devices installed in the system, call:

// Provided by VK_VERSION_1_0
VkResult vkEnumeratePhysicalDevices(
    VkInstance                                  instance,
    uint32_t*                                   pPhysicalDeviceCount,
    VkPhysicalDevice*                           pPhysicalDevices);
  • instance is a handle to a Vulkan instance previously created with vkCreateInstance.

  • pPhysicalDeviceCount is a pointer to an integer related to the number of physical devices available or queried, as described below.

  • pPhysicalDevices is either NULL or a pointer to an array of VkPhysicalDevice handles.

If pPhysicalDevices is NULL, then the number of physical devices available is returned in pPhysicalDeviceCount. Otherwise, pPhysicalDeviceCount must point to a variable set by the user to the number of elements in the pPhysicalDevices array, and on return the variable is overwritten with the number of handles actually written to pPhysicalDevices. If pPhysicalDeviceCount is less than the number of physical devices available, at most pPhysicalDeviceCount structures will be written, and VK_INCOMPLETE will be returned instead of VK_SUCCESS, to indicate that not all the available physical devices were returned.

Valid Usage (Implicit)
  • VUID-vkEnumeratePhysicalDevices-instance-parameter
    instance must be a valid VkInstance handle

  • VUID-vkEnumeratePhysicalDevices-pPhysicalDeviceCount-parameter
    pPhysicalDeviceCount must be a valid pointer to a uint32_t value

  • VUID-vkEnumeratePhysicalDevices-pPhysicalDevices-parameter
    If the value referenced by pPhysicalDeviceCount is not 0, and pPhysicalDevices is not NULL, pPhysicalDevices must be a valid pointer to an array of pPhysicalDeviceCount VkPhysicalDevice handles

Return Codes
Success
  • VK_SUCCESS

  • VK_INCOMPLETE

Failure
  • VK_ERROR_OUT_OF_HOST_MEMORY

  • VK_ERROR_OUT_OF_DEVICE_MEMORY

  • VK_ERROR_INITIALIZATION_FAILED

To query general properties of physical devices once enumerated, call:

// Provided by VK_VERSION_1_0
void vkGetPhysicalDeviceProperties(
    VkPhysicalDevice                            physicalDevice,
    VkPhysicalDeviceProperties*                 pProperties);
  • physicalDevice is the handle to the physical device whose properties will be queried.

  • pProperties is a pointer to a VkPhysicalDeviceProperties structure in which properties are returned.

Valid Usage (Implicit)
  • VUID-vkGetPhysicalDeviceProperties-physicalDevice-parameter
    physicalDevice must be a valid VkPhysicalDevice handle

  • VUID-vkGetPhysicalDeviceProperties-pProperties-parameter
    pProperties must be a valid pointer to a VkPhysicalDeviceProperties structure

The VkPhysicalDeviceProperties structure is defined as:

// Provided by VK_VERSION_1_0
typedef struct VkPhysicalDeviceProperties {
    uint32_t                            apiVersion;
    uint32_t                            driverVersion;
    uint32_t                            vendorID;
    uint32_t                            deviceID;
    VkPhysicalDeviceType                deviceType;
    char                                deviceName[VK_MAX_PHYSICAL_DEVICE_NAME_SIZE];
    uint8_t                             pipelineCacheUUID[VK_UUID_SIZE];
    VkPhysicalDeviceLimits              limits;
    VkPhysicalDeviceSparseProperties    sparseProperties;
} VkPhysicalDeviceProperties;
  • apiVersion is the version of Vulkan supported by the device, encoded as described in Version Numbers.

  • driverVersion is the vendor-specified version of the driver.

  • vendorID is a unique identifier for the vendor (see below) of the physical device.

  • deviceID is a unique identifier for the physical device among devices available from the vendor.

  • deviceType is a VkPhysicalDeviceType specifying the type of device.

  • deviceName is an array of VK_MAX_PHYSICAL_DEVICE_NAME_SIZE char containing a null-terminated UTF-8 string which is the name of the device.

  • pipelineCacheUUID is an array of VK_UUID_SIZE uint8_t values representing a universally unique identifier for the device.

  • limits is the VkPhysicalDeviceLimits structure specifying device-specific limits of the physical device. See Limits for details.

  • sparseProperties is the VkPhysicalDeviceSparseProperties structure specifying various sparse related properties of the physical device. See Sparse Properties for details.

Note

The value of apiVersion may be different than the version returned by vkEnumerateInstanceVersion; either higher or lower. In such cases, the application must not use functionality that exceeds the version of Vulkan associated with a given object. The pApiVersion parameter returned by vkEnumerateInstanceVersion is the version associated with a VkInstance and its children, except for a VkPhysicalDevice and its children. VkPhysicalDeviceProperties::apiVersion is the version associated with a VkPhysicalDevice and its children.

Note

The encoding of driverVersion is implementation-defined. It may not use the same encoding as apiVersion. Applications should follow information from the vendor on how to extract the version information from driverVersion.

On implementations that claim support for the Roadmap 2022 profile, the major and minor version expressed by apiVersion must be at least Vulkan 1.3.

The vendorID and deviceID fields are provided to allow applications to adapt to device characteristics that are not adequately exposed by other Vulkan queries.

Note

These may include performance profiles, hardware errata, or other characteristics.

The vendor identified by vendorID is the entity responsible for the most salient characteristics of the underlying implementation of the VkPhysicalDevice being queried.

Note

For example, in the case of a discrete GPU implementation, this should be the GPU chipset vendor. In the case of a hardware accelerator integrated into a system-on-chip (SoC), this should be the supplier of the silicon IP used to create the accelerator.

If the vendor has a PCI vendor ID, the low 16 bits of vendorID must contain that PCI vendor ID, and the remaining bits must be set to zero. Otherwise, the value returned must be a valid Khronos vendor ID, obtained as described in the Vulkan Documentation and Extensions: Procedures and Conventions document in the section “Registering a Vendor ID with Khronos”. Khronos vendor IDs are allocated starting at 0x10000, to distinguish them from the PCI vendor ID namespace. Khronos vendor IDs are symbolically defined in the VkVendorId type.

The vendor is also responsible for the value returned in deviceID. If the implementation is driven primarily by a PCI device with a PCI device ID, the low 16 bits of deviceID must contain that PCI device ID, and the remaining bits must be set to zero. Otherwise, the choice of what values to return may be dictated by operating system or platform policies - but should uniquely identify both the device version and any major configuration options (for example, core count in the case of multicore devices).

Note

The same device ID should be used for all physical implementations of that device version and configuration. For example, all uses of a specific silicon IP GPU version and configuration should use the same device ID, even if those uses occur in different SoCs.

Khronos vendor IDs which may be returned in VkPhysicalDeviceProperties::vendorID are:

// Provided by VK_VERSION_1_0
typedef enum VkVendorId {
    VK_VENDOR_ID_VIV = 0x10001,
    VK_VENDOR_ID_VSI = 0x10002,
    VK_VENDOR_ID_KAZAN = 0x10003,
    VK_VENDOR_ID_CODEPLAY = 0x10004,
    VK_VENDOR_ID_MESA = 0x10005,
    VK_VENDOR_ID_POCL = 0x10006,
    VK_VENDOR_ID_MOBILEYE = 0x10007,
} VkVendorId;
Note

Khronos vendor IDs may be allocated by vendors at any time. Only the latest canonical versions of this Specification, of the corresponding vk.xml API Registry, and of the corresponding vulkan_core.h header file must contain all reserved Khronos vendor IDs.

Only Khronos vendor IDs are given symbolic names at present. PCI vendor IDs returned by the implementation can be looked up in the PCI-SIG database.

VK_MAX_PHYSICAL_DEVICE_NAME_SIZE is the length in char values of an array containing a physical device name string, as returned in VkPhysicalDeviceProperties::deviceName.

#define VK_MAX_PHYSICAL_DEVICE_NAME_SIZE  256U

The physical device types which may be returned in VkPhysicalDeviceProperties::deviceType are:

// Provided by VK_VERSION_1_0
typedef enum VkPhysicalDeviceType {
    VK_PHYSICAL_DEVICE_TYPE_OTHER = 0,
    VK_PHYSICAL_DEVICE_TYPE_INTEGRATED_GPU = 1,
    VK_PHYSICAL_DEVICE_TYPE_DISCRETE_GPU = 2,
    VK_PHYSICAL_DEVICE_TYPE_VIRTUAL_GPU = 3,
    VK_PHYSICAL_DEVICE_TYPE_CPU = 4,
} VkPhysicalDeviceType;
  • VK_PHYSICAL_DEVICE_TYPE_OTHER - the device does not match any other available types.

  • VK_PHYSICAL_DEVICE_TYPE_INTEGRATED_GPU - the device is typically one embedded in or tightly coupled with the host.

  • VK_PHYSICAL_DEVICE_TYPE_DISCRETE_GPU - the device is typically a separate processor connected to the host via an interlink.

  • VK_PHYSICAL_DEVICE_TYPE_VIRTUAL_GPU - the device is typically a virtual node in a virtualization environment.

  • VK_PHYSICAL_DEVICE_TYPE_CPU - the device is typically running on the same processors as the host.

The physical device type is advertised for informational purposes only, and does not directly affect the operation of the system. However, the device type may correlate with other advertised properties or capabilities of the system, such as how many memory heaps there are.

To query general properties of physical devices once enumerated, call:

// Provided by VK_VERSION_1_1
void vkGetPhysicalDeviceProperties2(
    VkPhysicalDevice                            physicalDevice,
    VkPhysicalDeviceProperties2*                pProperties);

or the equivalent command

// Provided by VK_KHR_get_physical_device_properties2
void vkGetPhysicalDeviceProperties2KHR(
    VkPhysicalDevice                            physicalDevice,
    VkPhysicalDeviceProperties2*                pProperties);
  • physicalDevice is the handle to the physical device whose properties will be queried.

  • pProperties is a pointer to a VkPhysicalDeviceProperties2 structure in which properties are returned.

Each structure in pProperties and its pNext chain contains members corresponding to implementation-dependent properties, behaviors, or limits. vkGetPhysicalDeviceProperties2 fills in each member to specify the corresponding value for the implementation.

Valid Usage (Implicit)
  • VUID-vkGetPhysicalDeviceProperties2-physicalDevice-parameter
    physicalDevice must be a valid VkPhysicalDevice handle

  • VUID-vkGetPhysicalDeviceProperties2-pProperties-parameter
    pProperties must be a valid pointer to a VkPhysicalDeviceProperties2 structure

The VkPhysicalDeviceProperties2 structure is defined as:

// Provided by VK_VERSION_1_1
typedef struct VkPhysicalDeviceProperties2 {
    VkStructureType               sType;
    void*                         pNext;
    VkPhysicalDeviceProperties    properties;
} VkPhysicalDeviceProperties2;

or the equivalent

// Provided by VK_KHR_get_physical_device_properties2
typedef VkPhysicalDeviceProperties2 VkPhysicalDeviceProperties2KHR;

The pNext chain of this structure is used to extend the structure with properties defined by extensions.

Valid Usage (Implicit)

The VkPhysicalDeviceVulkan11Properties structure is defined as:

// Provided by VK_VERSION_1_2
typedef struct VkPhysicalDeviceVulkan11Properties {
    VkStructureType            sType;
    void*                      pNext;
    uint8_t                    deviceUUID[VK_UUID_SIZE];
    uint8_t                    driverUUID[VK_UUID_SIZE];
    uint8_t                    deviceLUID[VK_LUID_SIZE];
    uint32_t                   deviceNodeMask;
    VkBool32                   deviceLUIDValid;
    uint32_t                   subgroupSize;
    VkShaderStageFlags         subgroupSupportedStages;
    VkSubgroupFeatureFlags     subgroupSupportedOperations;
    VkBool32                   subgroupQuadOperationsInAllStages;
    VkPointClippingBehavior    pointClippingBehavior;
    uint32_t                   maxMultiviewViewCount;
    uint32_t                   maxMultiviewInstanceIndex;
    VkBool32                   protectedNoFault;
    uint32_t                   maxPerSetDescriptors;
    VkDeviceSize               maxMemoryAllocationSize;
} VkPhysicalDeviceVulkan11Properties;
  • sType is a VkStructureType value identifying this structure.

  • pNext is NULL or a pointer to a structure extending this structure.

  • deviceUUID is an array of VK_UUID_SIZE uint8_t values representing a universally unique identifier for the device.

  • driverUUID is an array of VK_UUID_SIZE uint8_t values representing a universally unique identifier for the driver build in use by the device.

  • deviceLUID is an array of VK_LUID_SIZE uint8_t values representing a locally unique identifier for the device.

  • deviceNodeMask is a uint32_t bitfield identifying the node within a linked device adapter corresponding to the device.

  • deviceLUIDValid is a boolean value that will be VK_TRUE if deviceLUID contains a valid LUID and deviceNodeMask contains a valid node mask, and VK_FALSE if they do not.

  • subgroupSize is the default number of invocations in each subgroup. subgroupSize is at least 1 if any of the physical device’s queues support VK_QUEUE_GRAPHICS_BIT or VK_QUEUE_COMPUTE_BIT. subgroupSize is a power-of-two.

  • subgroupSupportedStages is a bitfield of VkShaderStageFlagBits describing the shader stages that group operations with subgroup scope are supported in. subgroupSupportedStages will have the VK_SHADER_STAGE_COMPUTE_BIT bit set if any of the physical device’s queues support VK_QUEUE_COMPUTE_BIT.

  • subgroupSupportedOperations is a bitmask of VkSubgroupFeatureFlagBits specifying the sets of group operations with subgroup scope supported on this device. subgroupSupportedOperations will have the VK_SUBGROUP_FEATURE_BASIC_BIT bit set if any of the physical device’s queues support VK_QUEUE_GRAPHICS_BIT or VK_QUEUE_COMPUTE_BIT.

  • subgroupQuadOperationsInAllStages is a boolean specifying whether quad group operations are available in all stages, or are restricted to fragment and compute stages.

  • pointClippingBehavior is a VkPointClippingBehavior value specifying the point clipping behavior supported by the implementation.

  • maxMultiviewViewCount is one greater than the maximum view index that can be used in a subpass.

  • maxMultiviewInstanceIndex is the maximum valid value of instance index allowed to be generated by a drawing command recorded within a subpass of a multiview render pass instance.

  • protectedNoFault specifies how an implementation behaves when an application attempts to write to unprotected memory in a protected queue operation, read from protected memory in an unprotected queue operation, or perform a query in a protected queue operation. If this limit is VK_TRUE, such writes will be discarded or have undefined values written, reads and queries will return undefined values. If this limit is VK_FALSE, applications must not perform these operations. See Protected Memory Access Rules for more information.

  • maxPerSetDescriptors is a maximum number of descriptors (summed over all descriptor types) in a single descriptor set that is guaranteed to satisfy any implementation-dependent constraints on the size of a descriptor set itself. Applications can query whether a descriptor set that goes beyond this limit is supported using vkGetDescriptorSetLayoutSupport.

  • maxMemoryAllocationSize is the maximum size of a memory allocation that can be created, even if there is more space available in the heap.

If the VkPhysicalDeviceVulkan11Properties structure is included in the pNext chain of the VkPhysicalDeviceProperties2 structure passed to vkGetPhysicalDeviceProperties2, it is filled in with each corresponding implementation-dependent property.

These properties correspond to Vulkan 1.1 functionality.

Valid Usage (Implicit)
  • VUID-VkPhysicalDeviceVulkan11Properties-sType-sType
    sType must be VK_STRUCTURE_TYPE_PHYSICAL_DEVICE_VULKAN_1_1_PROPERTIES

The VkPhysicalDeviceVulkan12Properties structure is defined as:

// Provided by VK_VERSION_1_2
typedef struct VkPhysicalDeviceVulkan12Properties {
    VkStructureType                      sType;
    void*                                pNext;
    VkDriverId                           driverID;
    char                                 driverName[VK_MAX_DRIVER_NAME_SIZE];
    char                                 driverInfo[VK_MAX_DRIVER_INFO_SIZE];
    VkConformanceVersion                 conformanceVersion;
    VkShaderFloatControlsIndependence    denormBehaviorIndependence;
    VkShaderFloatControlsIndependence    roundingModeIndependence;
    VkBool32                             shaderSignedZeroInfNanPreserveFloat16;
    VkBool32                             shaderSignedZeroInfNanPreserveFloat32;
    VkBool32                             shaderSignedZeroInfNanPreserveFloat64;
    VkBool32                             shaderDenormPreserveFloat16;
    VkBool32                             shaderDenormPreserveFloat32;
    VkBool32                             shaderDenormPreserveFloat64;
    VkBool32                             shaderDenormFlushToZeroFloat16;
    VkBool32                             shaderDenormFlushToZeroFloat32;
    VkBool32                             shaderDenormFlushToZeroFloat64;
    VkBool32                             shaderRoundingModeRTEFloat16;
    VkBool32                             shaderRoundingModeRTEFloat32;
    VkBool32                             shaderRoundingModeRTEFloat64;
    VkBool32                             shaderRoundingModeRTZFloat16;
    VkBool32                             shaderRoundingModeRTZFloat32;
    VkBool32                             shaderRoundingModeRTZFloat64;
    uint32_t                             maxUpdateAfterBindDescriptorsInAllPools;
    VkBool32                             shaderUniformBufferArrayNonUniformIndexingNative;
    VkBool32                             shaderSampledImageArrayNonUniformIndexingNative;
    VkBool32                             shaderStorageBufferArrayNonUniformIndexingNative;
    VkBool32                             shaderStorageImageArrayNonUniformIndexingNative;
    VkBool32                             shaderInputAttachmentArrayNonUniformIndexingNative;
    VkBool32                             robustBufferAccessUpdateAfterBind;
    VkBool32                             quadDivergentImplicitLod;
    uint32_t                             maxPerStageDescriptorUpdateAfterBindSamplers;
    uint32_t                             maxPerStageDescriptorUpdateAfterBindUniformBuffers;
    uint32_t                             maxPerStageDescriptorUpdateAfterBindStorageBuffers;
    uint32_t                             maxPerStageDescriptorUpdateAfterBindSampledImages;
    uint32_t                             maxPerStageDescriptorUpdateAfterBindStorageImages;
    uint32_t                             maxPerStageDescriptorUpdateAfterBindInputAttachments;
    uint32_t                             maxPerStageUpdateAfterBindResources;
    uint32_t                             maxDescriptorSetUpdateAfterBindSamplers;
    uint32_t                             maxDescriptorSetUpdateAfterBindUniformBuffers;
    uint32_t                             maxDescriptorSetUpdateAfterBindUniformBuffersDynamic;
    uint32_t                             maxDescriptorSetUpdateAfterBindStorageBuffers;
    uint32_t                             maxDescriptorSetUpdateAfterBindStorageBuffersDynamic;
    uint32_t                             maxDescriptorSetUpdateAfterBindSampledImages;
    uint32_t                             maxDescriptorSetUpdateAfterBindStorageImages;
    uint32_t                             maxDescriptorSetUpdateAfterBindInputAttachments;
    VkResolveModeFlags                   supportedDepthResolveModes;
    VkResolveModeFlags                   supportedStencilResolveModes;
    VkBool32                             independentResolveNone;
    VkBool32                             independentResolve;
    VkBool32                             filterMinmaxSingleComponentFormats;
    VkBool32                             filterMinmaxImageComponentMapping;
    uint64_t                             maxTimelineSemaphoreValueDifference;
    VkSampleCountFlags                   framebufferIntegerColorSampleCounts;
} VkPhysicalDeviceVulkan12Properties;
  • sType is a VkStructureType value identifying this structure.

  • pNext is NULL or a pointer to a structure extending this structure.

  • driverID is a unique identifier for the driver of the physical device.

  • driverName is an array of VK_MAX_DRIVER_NAME_SIZE char containing a null-terminated UTF-8 string which is the name of the driver.

  • driverInfo is an array of VK_MAX_DRIVER_INFO_SIZE char containing a null-terminated UTF-8 string with additional information about the driver.

  • conformanceVersion is the version of the Vulkan conformance test this driver is conformant against (see VkConformanceVersion).

  • denormBehaviorIndependence is a VkShaderFloatControlsIndependence value indicating whether, and how, denorm behavior can be set independently for different bit widths.

  • roundingModeIndependence is a VkShaderFloatControlsIndependence value indicating whether, and how, rounding modes can be set independently for different bit widths.

  • shaderSignedZeroInfNanPreserveFloat16 is a boolean value indicating whether sign of a zero, Nans and can be preserved in 16-bit floating-point computations. It also indicates whether the SignedZeroInfNanPreserve execution mode can be used for 16-bit floating-point types.

  • shaderSignedZeroInfNanPreserveFloat32 is a boolean value indicating whether sign of a zero, Nans and can be preserved in 32-bit floating-point computations. It also indicates whether the SignedZeroInfNanPreserve execution mode can be used for 32-bit floating-point types.

  • shaderSignedZeroInfNanPreserveFloat64 is a boolean value indicating whether sign of a zero, Nans and can be preserved in 64-bit floating-point computations. It also indicates whether the SignedZeroInfNanPreserve execution mode can be used for 64-bit floating-point types.

  • shaderDenormPreserveFloat16 is a boolean value indicating whether denormals can be preserved in 16-bit floating-point computations. It also indicates whether the DenormPreserve execution mode can be used for 16-bit floating-point types.

  • shaderDenormPreserveFloat32 is a boolean value indicating whether denormals can be preserved in 32-bit floating-point computations. It also indicates whether the DenormPreserve execution mode can be used for 32-bit floating-point types.

  • shaderDenormPreserveFloat64 is a boolean value indicating whether denormals can be preserved in 64-bit floating-point computations. It also indicates whether the DenormPreserve execution mode can be used for 64-bit floating-point types.

  • shaderDenormFlushToZeroFloat16 is a boolean value indicating whether denormals can be flushed to zero in 16-bit floating-point computations. It also indicates whether the DenormFlushToZero execution mode can be used for 16-bit floating-point types.

  • shaderDenormFlushToZeroFloat32 is a boolean value indicating whether denormals can be flushed to zero in 32-bit floating-point computations. It also indicates whether the DenormFlushToZero execution mode can be used for 32-bit floating-point types.

  • shaderDenormFlushToZeroFloat64 is a boolean value indicating whether denormals can be flushed to zero in 64-bit floating-point computations. It also indicates whether the DenormFlushToZero execution mode can be used for 64-bit floating-point types.

  • shaderRoundingModeRTEFloat16 is a boolean value indicating whether an implementation supports the round-to-nearest-even rounding mode for 16-bit floating-point arithmetic and conversion instructions. It also indicates whether the RoundingModeRTE execution mode can be used for 16-bit floating-point types.

  • shaderRoundingModeRTEFloat32 is a boolean value indicating whether an implementation supports the round-to-nearest-even rounding mode for 32-bit floating-point arithmetic and conversion instructions. It also indicates whether the RoundingModeRTE execution mode can be used for 32-bit floating-point types.

  • shaderRoundingModeRTEFloat64 is a boolean value indicating whether an implementation supports the round-to-nearest-even rounding mode for 64-bit floating-point arithmetic and conversion instructions. It also indicates whether the RoundingModeRTE execution mode can be used for 64-bit floating-point types.

  • shaderRoundingModeRTZFloat16 is a boolean value indicating whether an implementation supports the round-towards-zero rounding mode for 16-bit floating-point arithmetic and conversion instructions. It also indicates whether the RoundingModeRTZ execution mode can be used for 16-bit floating-point types.

  • shaderRoundingModeRTZFloat32 is a boolean value indicating whether an implementation supports the round-towards-zero rounding mode for 32-bit floating-point arithmetic and conversion instructions. It also indicates whether the RoundingModeRTZ execution mode can be used for 32-bit floating-point types.

  • shaderRoundingModeRTZFloat64 is a boolean value indicating whether an implementation supports the round-towards-zero rounding mode for 64-bit floating-point arithmetic and conversion instructions. It also indicates whether the RoundingModeRTZ execution mode can be used for 64-bit floating-point types.

  • maxUpdateAfterBindDescriptorsInAllPools is the maximum number of descriptors (summed over all descriptor types) that can be created across all pools that are created with the VK_DESCRIPTOR_POOL_CREATE_UPDATE_AFTER_BIND_BIT bit set. Pool creation may fail when this limit is exceeded, or when the space this limit represents is unable to satisfy a pool creation due to fragmentation.

  • shaderUniformBufferArrayNonUniformIndexingNative is a boolean value indicating whether uniform buffer descriptors natively support nonuniform indexing. If this is VK_FALSE, then a single dynamic instance of an instruction that nonuniformly indexes an array of uniform buffers may execute multiple times in order to access all the descriptors.

  • shaderSampledImageArrayNonUniformIndexingNative is a boolean value indicating whether sampler and image descriptors natively support nonuniform indexing. If this is VK_FALSE, then a single dynamic instance of an instruction that nonuniformly indexes an array of samplers or images may execute multiple times in order to access all the descriptors.

  • shaderStorageBufferArrayNonUniformIndexingNative is a boolean value indicating whether storage buffer descriptors natively support nonuniform indexing. If this is VK_FALSE, then a single dynamic instance of an instruction that nonuniformly indexes an array of storage buffers may execute multiple times in order to access all the descriptors.

  • shaderStorageImageArrayNonUniformIndexingNative is a boolean value indicating whether storage image descriptors natively support nonuniform indexing. If this is VK_FALSE, then a single dynamic instance of an instruction that nonuniformly indexes an array of storage images may execute multiple times in order to access all the descriptors.

  • shaderInputAttachmentArrayNonUniformIndexingNative is a boolean value indicating whether input attachment descriptors natively support nonuniform indexing. If this is VK_FALSE, then a single dynamic instance of an instruction that nonuniformly indexes an array of input attachments may execute multiple times in order to access all the descriptors.

  • robustBufferAccessUpdateAfterBind is a boolean value indicating whether robustBufferAccess can be enabled on a device simultaneously with descriptorBindingUniformBufferUpdateAfterBind, descriptorBindingStorageBufferUpdateAfterBind, descriptorBindingUniformTexelBufferUpdateAfterBind, and/or descriptorBindingStorageTexelBufferUpdateAfterBind. If this is VK_FALSE, then either robustBufferAccess must be disabled or all of these update-after-bind features must be disabled.

  • quadDivergentImplicitLod is a boolean value indicating whether implicit LOD calculations for image operations have well-defined results when the image and/or sampler objects used for the instruction are not uniform within a quad. See Derivative Image Operations.

  • maxPerStageDescriptorUpdateAfterBindSamplers is similar to maxPerStageDescriptorSamplers but counts descriptors from descriptor sets created with or without the VK_DESCRIPTOR_SET_LAYOUT_CREATE_UPDATE_AFTER_BIND_POOL_BIT bit set.

  • maxPerStageDescriptorUpdateAfterBindUniformBuffers is similar to maxPerStageDescriptorUniformBuffers but counts descriptors from descriptor sets created with or without the VK_DESCRIPTOR_SET_LAYOUT_CREATE_UPDATE_AFTER_BIND_POOL_BIT bit set.

  • maxPerStageDescriptorUpdateAfterBindStorageBuffers is similar to maxPerStageDescriptorStorageBuffers but counts descriptors from descriptor sets created with or without the VK_DESCRIPTOR_SET_LAYOUT_CREATE_UPDATE_AFTER_BIND_POOL_BIT bit set.

  • maxPerStageDescriptorUpdateAfterBindSampledImages is similar to maxPerStageDescriptorSampledImages but counts descriptors from descriptor sets created with or without the VK_DESCRIPTOR_SET_LAYOUT_CREATE_UPDATE_AFTER_BIND_POOL_BIT bit set.

  • maxPerStageDescriptorUpdateAfterBindStorageImages is similar to maxPerStageDescriptorStorageImages but counts descriptors from descriptor sets created with or without the VK_DESCRIPTOR_SET_LAYOUT_CREATE_UPDATE_AFTER_BIND_POOL_BIT bit set.

  • maxPerStageDescriptorUpdateAfterBindInputAttachments is similar to maxPerStageDescriptorInputAttachments but counts descriptors from descriptor sets created with or without the VK_DESCRIPTOR_SET_LAYOUT_CREATE_UPDATE_AFTER_BIND_POOL_BIT bit set.

  • maxPerStageUpdateAfterBindResources is similar to maxPerStageResources but counts descriptors from descriptor sets created with or without the VK_DESCRIPTOR_SET_LAYOUT_CREATE_UPDATE_AFTER_BIND_POOL_BIT bit set.

  • maxDescriptorSetUpdateAfterBindSamplers is similar to maxDescriptorSetSamplers but counts descriptors from descriptor sets created with or without the VK_DESCRIPTOR_SET_LAYOUT_CREATE_UPDATE_AFTER_BIND_POOL_BIT bit set.

  • maxDescriptorSetUpdateAfterBindUniformBuffers is similar to maxDescriptorSetUniformBuffers but counts descriptors from descriptor sets created with or without the VK_DESCRIPTOR_SET_LAYOUT_CREATE_UPDATE_AFTER_BIND_POOL_BIT bit set.

  • maxDescriptorSetUpdateAfterBindUniformBuffersDynamic is similar to maxDescriptorSetUniformBuffersDynamic but counts descriptors from descriptor sets created with or without the VK_DESCRIPTOR_SET_LAYOUT_CREATE_UPDATE_AFTER_BIND_POOL_BIT bit set. While an application can allocate dynamic uniform buffer descriptors from a pool created with the VK_DESCRIPTOR_SET_LAYOUT_CREATE_UPDATE_AFTER_BIND_POOL_BIT, bindings for these descriptors must not be present in any descriptor set layout that includes bindings created with VK_DESCRIPTOR_BINDING_UPDATE_AFTER_BIND_BIT.

  • maxDescriptorSetUpdateAfterBindStorageBuffers is similar to maxDescriptorSetStorageBuffers but counts descriptors from descriptor sets created with or without the VK_DESCRIPTOR_SET_LAYOUT_CREATE_UPDATE_AFTER_BIND_POOL_BIT bit set.

  • maxDescriptorSetUpdateAfterBindStorageBuffersDynamic is similar to maxDescriptorSetStorageBuffersDynamic but counts descriptors from descriptor sets created with or without the VK_DESCRIPTOR_SET_LAYOUT_CREATE_UPDATE_AFTER_BIND_POOL_BIT bit set. While an application can allocate dynamic storage buffer descriptors from a pool created with the VK_DESCRIPTOR_SET_LAYOUT_CREATE_UPDATE_AFTER_BIND_POOL_BIT, bindings for these descriptors must not be present in any descriptor set layout that includes bindings created with VK_DESCRIPTOR_BINDING_UPDATE_AFTER_BIND_BIT.

  • maxDescriptorSetUpdateAfterBindSampledImages is similar to maxDescriptorSetSampledImages but counts descriptors from descriptor sets created with or without the VK_DESCRIPTOR_SET_LAYOUT_CREATE_UPDATE_AFTER_BIND_POOL_BIT bit set.

  • maxDescriptorSetUpdateAfterBindStorageImages is similar to maxDescriptorSetStorageImages but counts descriptors from descriptor sets created with or without the VK_DESCRIPTOR_SET_LAYOUT_CREATE_UPDATE_AFTER_BIND_POOL_BIT bit set.

  • maxDescriptorSetUpdateAfterBindInputAttachments is similar to maxDescriptorSetInputAttachments but counts descriptors from descriptor sets created with or without the VK_DESCRIPTOR_SET_LAYOUT_CREATE_UPDATE_AFTER_BIND_POOL_BIT bit set.

  • supportedDepthResolveModes is a bitmask of VkResolveModeFlagBits indicating the set of supported depth resolve modes. VK_RESOLVE_MODE_SAMPLE_ZERO_BIT must be included in the set but implementations may support additional modes.

  • supportedStencilResolveModes is a bitmask of VkResolveModeFlagBits indicating the set of supported stencil resolve modes. VK_RESOLVE_MODE_SAMPLE_ZERO_BIT must be included in the set but implementations may support additional modes. VK_RESOLVE_MODE_AVERAGE_BIT must not be included in the set.

  • independentResolveNone is VK_TRUE if the implementation supports setting the depth and stencil resolve modes to different values when one of those modes is VK_RESOLVE_MODE_NONE. Otherwise the implementation only supports setting both modes to the same value.

  • independentResolve is VK_TRUE if the implementation supports all combinations of the supported depth and stencil resolve modes, including setting either depth or stencil resolve mode to VK_RESOLVE_MODE_NONE. An implementation that supports independentResolve must also support independentResolveNone.

  • filterMinmaxSingleComponentFormats is a boolean value indicating whether a minimum set of required formats support min/max filtering.

  • filterMinmaxImageComponentMapping is a boolean value indicating whether the implementation supports non-identity component mapping of the image when doing min/max filtering.

  • maxTimelineSemaphoreValueDifference indicates the maximum difference allowed by the implementation between the current value of a timeline semaphore and any pending signal or wait operations.

  • framebufferIntegerColorSampleCounts is a bitmask of VkSampleCountFlagBits indicating the color sample counts that are supported for all framebuffer color attachments with integer formats.

If the VkPhysicalDeviceVulkan12Properties structure is included in the pNext chain of the VkPhysicalDeviceProperties2 structure passed to vkGetPhysicalDeviceProperties2, it is filled in with each corresponding implementation-dependent property.

These properties correspond to Vulkan 1.2 functionality.

Valid Usage (Implicit)
  • VUID-VkPhysicalDeviceVulkan12Properties-sType-sType
    sType must be VK_STRUCTURE_TYPE_PHYSICAL_DEVICE_VULKAN_1_2_PROPERTIES

The VkPhysicalDeviceVulkan13Properties structure is defined as:

// Provided by VK_VERSION_1_3
typedef struct VkPhysicalDeviceVulkan13Properties {
    VkStructureType       sType;
    void*                 pNext;
    uint32_t              minSubgroupSize;
    uint32_t              maxSubgroupSize;
    uint32_t              maxComputeWorkgroupSubgroups;
    VkShaderStageFlags    requiredSubgroupSizeStages;
    uint32_t              maxInlineUniformBlockSize;
    uint32_t              maxPerStageDescriptorInlineUniformBlocks;
    uint32_t              maxPerStageDescriptorUpdateAfterBindInlineUniformBlocks;
    uint32_t              maxDescriptorSetInlineUniformBlocks;
    uint32_t              maxDescriptorSetUpdateAfterBindInlineUniformBlocks;
    uint32_t              maxInlineUniformTotalSize;
    VkBool32              integerDotProduct8BitUnsignedAccelerated;
    VkBool32              integerDotProduct8BitSignedAccelerated;
    VkBool32              integerDotProduct8BitMixedSignednessAccelerated;
    VkBool32              integerDotProduct4x8BitPackedUnsignedAccelerated;
    VkBool32              integerDotProduct4x8BitPackedSignedAccelerated;
    VkBool32              integerDotProduct4x8BitPackedMixedSignednessAccelerated;
    VkBool32              integerDotProduct16BitUnsignedAccelerated;
    VkBool32              integerDotProduct16BitSignedAccelerated;
    VkBool32              integerDotProduct16BitMixedSignednessAccelerated;
    VkBool32              integerDotProduct32BitUnsignedAccelerated;
    VkBool32              integerDotProduct32BitSignedAccelerated;
    VkBool32              integerDotProduct32BitMixedSignednessAccelerated;
    VkBool32              integerDotProduct64BitUnsignedAccelerated;
    VkBool32              integerDotProduct64BitSignedAccelerated;
    VkBool32              integerDotProduct64BitMixedSignednessAccelerated;
    VkBool32              integerDotProductAccumulatingSaturating8BitUnsignedAccelerated;
    VkBool32              integerDotProductAccumulatingSaturating8BitSignedAccelerated;
    VkBool32              integerDotProductAccumulatingSaturating8BitMixedSignednessAccelerated;
    VkBool32              integerDotProductAccumulatingSaturating4x8BitPackedUnsignedAccelerated;
    VkBool32              integerDotProductAccumulatingSaturating4x8BitPackedSignedAccelerated;
    VkBool32              integerDotProductAccumulatingSaturating4x8BitPackedMixedSignednessAccelerated;
    VkBool32              integerDotProductAccumulatingSaturating16BitUnsignedAccelerated;
    VkBool32              integerDotProductAccumulatingSaturating16BitSignedAccelerated;
    VkBool32              integerDotProductAccumulatingSaturating16BitMixedSignednessAccelerated;
    VkBool32              integerDotProductAccumulatingSaturating32BitUnsignedAccelerated;
    VkBool32              integerDotProductAccumulatingSaturating32BitSignedAccelerated;
    VkBool32              integerDotProductAccumulatingSaturating32BitMixedSignednessAccelerated;
    VkBool32              integerDotProductAccumulatingSaturating64BitUnsignedAccelerated;
    VkBool32              integerDotProductAccumulatingSaturating64BitSignedAccelerated;
    VkBool32              integerDotProductAccumulatingSaturating64BitMixedSignednessAccelerated;
    VkDeviceSize          storageTexelBufferOffsetAlignmentBytes;
    VkBool32              storageTexelBufferOffsetSingleTexelAlignment;
    VkDeviceSize          uniformTexelBufferOffsetAlignmentBytes;
    VkBool32              uniformTexelBufferOffsetSingleTexelAlignment;
    VkDeviceSize          maxBufferSize;
} VkPhysicalDeviceVulkan13Properties;
  • sType is a VkStructureType value identifying this structure.

  • pNext is NULL or a pointer to a structure extending this structure.

  • minSubgroupSize is the minimum subgroup size supported by this device. minSubgroupSize is at least one if any of the physical device’s queues support VK_QUEUE_GRAPHICS_BIT or VK_QUEUE_COMPUTE_BIT. minSubgroupSize is a power-of-two. minSubgroupSize is less than or equal to maxSubgroupSize. minSubgroupSize is less than or equal to subgroupSize.

  • maxSubgroupSize is the maximum subgroup size supported by this device. maxSubgroupSize is at least one if any of the physical device’s queues support VK_QUEUE_GRAPHICS_BIT or VK_QUEUE_COMPUTE_BIT. maxSubgroupSize is a power-of-two. maxSubgroupSize is greater than or equal to minSubgroupSize. maxSubgroupSize is greater than or equal to subgroupSize.

  • maxComputeWorkgroupSubgroups is the maximum number of subgroups supported by the implementation within a workgroup.

  • requiredSubgroupSizeStages is a bitfield of what shader stages support having a required subgroup size specified.

  • maxInlineUniformBlockSize is the maximum size in bytes of an inline uniform block binding.

  • maxPerStageDescriptorInlineUniformBlocks is the maximum number of inline uniform block bindings that can be accessible to a single shader stage in a pipeline layout. Descriptor bindings with a descriptor type of VK_DESCRIPTOR_TYPE_INLINE_UNIFORM_BLOCK count against this limit. Only descriptor bindings in descriptor set layouts created without the VK_DESCRIPTOR_SET_LAYOUT_CREATE_UPDATE_AFTER_BIND_POOL_BIT bit set count against this limit.

  • maxPerStageDescriptorUpdateAfterBindInlineUniformBlocks is similar to maxPerStageDescriptorInlineUniformBlocks but counts descriptor bindings from descriptor sets created with or without the VK_DESCRIPTOR_SET_LAYOUT_CREATE_UPDATE_AFTER_BIND_POOL_BIT bit set.

  • maxDescriptorSetInlineUniformBlocks is the maximum number of inline uniform block bindings that can be included in descriptor bindings in a pipeline layout across all pipeline shader stages and descriptor set numbers. Descriptor bindings with a descriptor type of VK_DESCRIPTOR_TYPE_INLINE_UNIFORM_BLOCK count against this limit. Only descriptor bindings in descriptor set layouts created without the VK_DESCRIPTOR_SET_LAYOUT_CREATE_UPDATE_AFTER_BIND_POOL_BIT bit set count against this limit.

  • maxDescriptorSetUpdateAfterBindInlineUniformBlocks is similar to maxDescriptorSetInlineUniformBlocks but counts descriptor bindings from descriptor sets created with or without the VK_DESCRIPTOR_SET_LAYOUT_CREATE_UPDATE_AFTER_BIND_POOL_BIT bit set.

  • maxInlineUniformTotalSize is the maximum total size in bytes of all inline uniform block bindings, across all pipeline shader stages and descriptor set numbers, that can be included in a pipeline layout. Descriptor bindings with a descriptor type of VK_DESCRIPTOR_TYPE_INLINE_UNIFORM_BLOCK count against this limit.

  • integerDotProduct8BitUnsignedAccelerated is a boolean that will be VK_TRUE if the support for 8-bit unsigned dot product operations using the OpUDotKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProduct8BitSignedAccelerated is a boolean that will be VK_TRUE if the support for 8-bit signed dot product operations using the OpSDotKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProduct8BitMixedSignednessAccelerated is a boolean that will be VK_TRUE if the support for 8-bit mixed signedness dot product operations using the OpSUDotKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProduct4x8BitPackedUnsignedAccelerated is a boolean that will be VK_TRUE if the support for 8-bit unsigned dot product operations from operands packed into 32-bit integers using the OpUDotKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProduct4x8BitPackedSignedAccelerated is a boolean that will be VK_TRUE if the support for 8-bit signed dot product operations from operands packed into 32-bit integers using the OpSDotKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProduct4x8BitPackedMixedSignednessAccelerated is a boolean that will be VK_TRUE if the support for 8-bit mixed signedness dot product operations from operands packed into 32-bit integers using the OpSUDotKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProduct16BitUnsignedAccelerated is a boolean that will be VK_TRUE if the support for 16-bit unsigned dot product operations using the OpUDotKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProduct16BitSignedAccelerated is a boolean that will be VK_TRUE if the support for 16-bit signed dot product operations using the OpSDotKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProduct16BitMixedSignednessAccelerated is a boolean that will be VK_TRUE if the support for 16-bit mixed signedness dot product operations using the OpSUDotKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProduct32BitUnsignedAccelerated is a boolean that will be VK_TRUE if the support for 32-bit unsigned dot product operations using the OpUDotKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProduct32BitSignedAccelerated is a boolean that will be VK_TRUE if the support for 32-bit signed dot product operations using the OpSDotKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProduct32BitMixedSignednessAccelerated is a boolean that will be VK_TRUE if the support for 32-bit mixed signedness dot product operations using the OpSUDotKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProduct64BitUnsignedAccelerated is a boolean that will be VK_TRUE if the support for 64-bit unsigned dot product operations using the OpUDotKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProduct64BitSignedAccelerated is a boolean that will be VK_TRUE if the support for 64-bit signed dot product operations using the OpSDotKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProduct64BitMixedSignednessAccelerated is a boolean that will be VK_TRUE if the support for 64-bit mixed signedness dot product operations using the OpSUDotKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProductAccumulatingSaturating8BitUnsignedAccelerated is a boolean that will be VK_TRUE if the support for 8-bit unsigned accumulating saturating dot product operations using the OpUDotAccSatKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProductAccumulatingSaturating8BitSignedAccelerated is a boolean that will be VK_TRUE if the support for 8-bit signed accumulating saturating dot product operations using the OpSDotAccSatKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProductAccumulatingSaturating8BitMixedSignednessAccelerated is a boolean that will be VK_TRUE if the support for 8-bit mixed signedness accumulating saturating dot product operations using the OpSUDotAccSatKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProductAccumulatingSaturating4x8BitPackedUnsignedAccelerated is a boolean that will be VK_TRUE if the support for 8-bit unsigned accumulating saturating dot product operations from operands packed into 32-bit integers using the OpUDotAccSatKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProductAccumulatingSaturating4x8BitPackedSignedAccelerated is a boolean that will be VK_TRUE if the support for 8-bit signed accumulating saturating dot product operations from operands packed into 32-bit integers using the OpSDotAccSatKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProductAccumulatingSaturating4x8BitPackedMixedSignednessAccelerated is a boolean that will be VK_TRUE if the support for 8-bit mixed signedness accumulating saturating dot product operations from operands packed into 32-bit integers using the OpSUDotAccSatKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProductAccumulatingSaturating16BitUnsignedAccelerated is a boolean that will be VK_TRUE if the support for 16-bit unsigned accumulating saturating dot product operations using the OpUDotAccSatKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProductAccumulatingSaturating16BitSignedAccelerated is a boolean that will be VK_TRUE if the support for 16-bit signed accumulating saturating dot product operations using the OpSDotAccSatKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProductAccumulatingSaturating16BitMixedSignednessAccelerated is a boolean that will be VK_TRUE if the support for 16-bit mixed signedness accumulating saturating dot product operations using the OpSUDotAccSatKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProductAccumulatingSaturating32BitUnsignedAccelerated is a boolean that will be VK_TRUE if the support for 32-bit unsigned accumulating saturating dot product operations using the OpUDotAccSatKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProductAccumulatingSaturating32BitSignedAccelerated is a boolean that will be VK_TRUE if the support for 32-bit signed accumulating saturating dot product operations using the OpSDotAccSatKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProductAccumulatingSaturating32BitMixedSignednessAccelerated is a boolean that will be VK_TRUE if the support for 32-bit mixed signedness accumulating saturating dot product operations using the OpSUDotAccSatKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProductAccumulatingSaturating64BitUnsignedAccelerated is a boolean that will be VK_TRUE if the support for 64-bit unsigned accumulating saturating dot product operations using the OpUDotAccSatKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProductAccumulatingSaturating64BitSignedAccelerated is a boolean that will be VK_TRUE if the support for 64-bit signed accumulating saturating dot product operations using the OpSDotAccSatKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProductAccumulatingSaturating64BitMixedSignednessAccelerated is a boolean that will be VK_TRUE if the support for 64-bit mixed signedness accumulating saturating dot product operations using the OpSUDotAccSatKHR SPIR-V instruction is accelerated as defined below.

  • storageTexelBufferOffsetAlignmentBytes is a byte alignment that is sufficient for a storage texel buffer of any format. The value must be a power of two.

  • storageTexelBufferOffsetSingleTexelAlignment indicates whether single texel alignment is sufficient for a storage texel buffer of any format.

  • uniformTexelBufferOffsetAlignmentBytes is a byte alignment that is sufficient for a uniform texel buffer of any format. The value must be a power of two.

  • uniformTexelBufferOffsetSingleTexelAlignment indicates whether single texel alignment is sufficient for a uniform texel buffer of any format.

  • maxBufferSize is the maximum size VkBuffer that can be created.

If the VkPhysicalDeviceVulkan13Properties structure is included in the pNext chain of the VkPhysicalDeviceProperties2 structure passed to vkGetPhysicalDeviceProperties2, it is filled in with each corresponding implementation-dependent property.

These properties correspond to Vulkan 1.3 functionality.

The members of VkPhysicalDeviceVulkan13Properties must have the same values as the corresponding members of VkPhysicalDeviceInlineUniformBlockProperties and VkPhysicalDeviceSubgroupSizeControlProperties.

Valid Usage (Implicit)
  • VUID-VkPhysicalDeviceVulkan13Properties-sType-sType
    sType must be VK_STRUCTURE_TYPE_PHYSICAL_DEVICE_VULKAN_1_3_PROPERTIES

The VkPhysicalDeviceIDProperties structure is defined as:

// Provided by VK_VERSION_1_1
typedef struct VkPhysicalDeviceIDProperties {
    VkStructureType    sType;
    void*              pNext;
    uint8_t            deviceUUID[VK_UUID_SIZE];
    uint8_t            driverUUID[VK_UUID_SIZE];
    uint8_t            deviceLUID[VK_LUID_SIZE];
    uint32_t           deviceNodeMask;
    VkBool32           deviceLUIDValid;
} VkPhysicalDeviceIDProperties;

or the equivalent

// Provided by VK_KHR_external_fence_capabilities, VK_KHR_external_memory_capabilities, VK_KHR_external_semaphore_capabilities
typedef VkPhysicalDeviceIDProperties VkPhysicalDeviceIDPropertiesKHR;
  • sType is a VkStructureType value identifying this structure.

  • pNext is NULL or a pointer to a structure extending this structure.

  • deviceUUID is an array of VK_UUID_SIZE uint8_t values representing a universally unique identifier for the device.

  • driverUUID is an array of VK_UUID_SIZE uint8_t values representing a universally unique identifier for the driver build in use by the device.

  • deviceLUID is an array of VK_LUID_SIZE uint8_t values representing a locally unique identifier for the device.

  • deviceNodeMask is a uint32_t bitfield identifying the node within a linked device adapter corresponding to the device.

  • deviceLUIDValid is a boolean value that will be VK_TRUE if deviceLUID contains a valid LUID and deviceNodeMask contains a valid node mask, and VK_FALSE if they do not.

If the VkPhysicalDeviceIDProperties structure is included in the pNext chain of the VkPhysicalDeviceProperties2 structure passed to vkGetPhysicalDeviceProperties2, it is filled in with each corresponding implementation-dependent property.

deviceUUID must be immutable for a given device across instances, processes, driver APIs, driver versions, and system reboots.

Applications can compare the driverUUID value across instance and process boundaries, and can make similar queries in external APIs to determine whether they are capable of sharing memory objects and resources using them with the device.

deviceUUID and/or driverUUID must be used to determine whether a particular external object can be shared between driver components, where such a restriction exists as defined in the compatibility table for the particular object type:

If deviceLUIDValid is VK_FALSE, the values of deviceLUID and deviceNodeMask are undefined. If deviceLUIDValid is VK_TRUE and Vulkan is running on the Windows operating system, the contents of deviceLUID can be cast to an LUID object and must be equal to the locally unique identifier of a IDXGIAdapter1 object that corresponds to physicalDevice. If deviceLUIDValid is VK_TRUE, deviceNodeMask must contain exactly one bit. If Vulkan is running on an operating system that supports the Direct3D 12 API and physicalDevice corresponds to an individual device in a linked device adapter, deviceNodeMask identifies the Direct3D 12 node corresponding to physicalDevice. Otherwise, deviceNodeMask must be 1.

Note

Although they have identical descriptions, VkPhysicalDeviceIDProperties::deviceUUID may differ from VkPhysicalDeviceProperties2::pipelineCacheUUID. The former is intended to identify and correlate devices across API and driver boundaries, while the latter is used to identify a compatible device and driver combination to use when serializing and de-serializing pipeline state.

Implementations should return deviceUUID values which are likely to be unique even in the presence of multiple Vulkan implementations (such as a GPU driver and a software renderer; two drivers for different GPUs; or the same Vulkan driver running on two logically different devices).

Khronos' conformance testing is unable to guarantee that deviceUUID values are actually unique, so implementors should make their own best efforts to ensure this. In particular, hard-coded deviceUUID values, especially all-0 bits, should never be used.

A combination of values unique to the vendor, the driver, and the hardware environment can be used to provide a deviceUUID which is unique to a high degree of certainty. Some possible inputs to such a computation are:

  • Information reported by vkGetPhysicalDeviceProperties

  • PCI device ID (if defined)

  • PCI bus ID, or similar system configuration information.

  • Driver binary checksums.

Note

While VkPhysicalDeviceIDProperties::deviceUUID is specified to remain consistent across driver versions and system reboots, it is not intended to be usable as a serializable persistent identifier for a device. It may change when a device is physically added to, removed from, or moved to a different connector in a system while that system is powered down. Further, there is no reasonable way to verify with conformance testing that a given device retains the same UUID in a given system across all driver versions supported in that system. While implementations should make every effort to report consistent device UUIDs across driver versions, applications should avoid relying on the persistence of this value for uses other than identifying compatible devices for external object sharing purposes.

Valid Usage (Implicit)
  • VUID-VkPhysicalDeviceIDProperties-sType-sType
    sType must be VK_STRUCTURE_TYPE_PHYSICAL_DEVICE_ID_PROPERTIES

VK_UUID_SIZE is the length in uint8_t values of an array containing a universally unique device or driver build identifier, as returned in VkPhysicalDeviceIDProperties::deviceUUID and VkPhysicalDeviceIDProperties::driverUUID.

#define VK_UUID_SIZE                      16U

VK_LUID_SIZE is the length in uint8_t values of an array containing a locally unique device identifier, as returned in VkPhysicalDeviceIDProperties::deviceLUID.

#define VK_LUID_SIZE                      8U

or the equivalent

#define VK_LUID_SIZE_KHR                  VK_LUID_SIZE

The VkPhysicalDeviceDriverProperties structure is defined as:

// Provided by VK_VERSION_1_2
typedef struct VkPhysicalDeviceDriverProperties {
    VkStructureType         sType;
    void*                   pNext;
    VkDriverId              driverID;
    char                    driverName[VK_MAX_DRIVER_NAME_SIZE];
    char                    driverInfo[VK_MAX_DRIVER_INFO_SIZE];
    VkConformanceVersion    conformanceVersion;
} VkPhysicalDeviceDriverProperties;

or the equivalent

// Provided by VK_KHR_driver_properties
typedef VkPhysicalDeviceDriverProperties VkPhysicalDeviceDriverPropertiesKHR;
  • sType is a VkStructureType value identifying this structure.

  • pNext is NULL or a pointer to a structure extending this structure.

  • driverID is a unique identifier for the driver of the physical device.

  • driverName is an array of VK_MAX_DRIVER_NAME_SIZE char containing a null-terminated UTF-8 string which is the name of the driver.

  • driverInfo is an array of VK_MAX_DRIVER_INFO_SIZE char containing a null-terminated UTF-8 string with additional information about the driver.

  • conformanceVersion is the version of the Vulkan conformance test this driver is conformant against (see VkConformanceVersion).

If the VkPhysicalDeviceDriverProperties structure is included in the pNext chain of the VkPhysicalDeviceProperties2 structure passed to vkGetPhysicalDeviceProperties2, it is filled in with each corresponding implementation-dependent property.

These are properties of the driver corresponding to a physical device.

driverID must be immutable for a given driver across instances, processes, driver versions, and system reboots.

Valid Usage (Implicit)
  • VUID-VkPhysicalDeviceDriverProperties-sType-sType
    sType must be VK_STRUCTURE_TYPE_PHYSICAL_DEVICE_DRIVER_PROPERTIES

Khronos driver IDs which may be returned in VkPhysicalDeviceDriverProperties::driverID are:

// Provided by VK_VERSION_1_2
typedef enum VkDriverId {
    VK_DRIVER_ID_AMD_PROPRIETARY = 1,
    VK_DRIVER_ID_AMD_OPEN_SOURCE = 2,
    VK_DRIVER_ID_MESA_RADV = 3,
    VK_DRIVER_ID_NVIDIA_PROPRIETARY = 4,
    VK_DRIVER_ID_INTEL_PROPRIETARY_WINDOWS = 5,
    VK_DRIVER_ID_INTEL_OPEN_SOURCE_MESA = 6,
    VK_DRIVER_ID_IMAGINATION_PROPRIETARY = 7,
    VK_DRIVER_ID_QUALCOMM_PROPRIETARY = 8,
    VK_DRIVER_ID_ARM_PROPRIETARY = 9,
    VK_DRIVER_ID_GOOGLE_SWIFTSHADER = 10,
    VK_DRIVER_ID_GGP_PROPRIETARY = 11,
    VK_DRIVER_ID_BROADCOM_PROPRIETARY = 12,
    VK_DRIVER_ID_MESA_LLVMPIPE = 13,
    VK_DRIVER_ID_MOLTENVK = 14,
    VK_DRIVER_ID_COREAVI_PROPRIETARY = 15,
    VK_DRIVER_ID_JUICE_PROPRIETARY = 16,
    VK_DRIVER_ID_VERISILICON_PROPRIETARY = 17,
    VK_DRIVER_ID_MESA_TURNIP = 18,
    VK_DRIVER_ID_MESA_V3DV = 19,
    VK_DRIVER_ID_MESA_PANVK = 20,
    VK_DRIVER_ID_SAMSUNG_PROPRIETARY = 21,
    VK_DRIVER_ID_MESA_VENUS = 22,
    VK_DRIVER_ID_MESA_DOZEN = 23,
    VK_DRIVER_ID_MESA_NVK = 24,
    VK_DRIVER_ID_IMAGINATION_OPEN_SOURCE_MESA = 25,
  // Provided by VK_KHR_driver_properties
    VK_DRIVER_ID_AMD_PROPRIETARY_KHR = VK_DRIVER_ID_AMD_PROPRIETARY,
  // Provided by VK_KHR_driver_properties
    VK_DRIVER_ID_AMD_OPEN_SOURCE_KHR = VK_DRIVER_ID_AMD_OPEN_SOURCE,
  // Provided by VK_KHR_driver_properties
    VK_DRIVER_ID_MESA_RADV_KHR = VK_DRIVER_ID_MESA_RADV,
  // Provided by VK_KHR_driver_properties
    VK_DRIVER_ID_NVIDIA_PROPRIETARY_KHR = VK_DRIVER_ID_NVIDIA_PROPRIETARY,
  // Provided by VK_KHR_driver_properties
    VK_DRIVER_ID_INTEL_PROPRIETARY_WINDOWS_KHR = VK_DRIVER_ID_INTEL_PROPRIETARY_WINDOWS,
  // Provided by VK_KHR_driver_properties
    VK_DRIVER_ID_INTEL_OPEN_SOURCE_MESA_KHR = VK_DRIVER_ID_INTEL_OPEN_SOURCE_MESA,
  // Provided by VK_KHR_driver_properties
    VK_DRIVER_ID_IMAGINATION_PROPRIETARY_KHR = VK_DRIVER_ID_IMAGINATION_PROPRIETARY,
  // Provided by VK_KHR_driver_properties
    VK_DRIVER_ID_QUALCOMM_PROPRIETARY_KHR = VK_DRIVER_ID_QUALCOMM_PROPRIETARY,
  // Provided by VK_KHR_driver_properties
    VK_DRIVER_ID_ARM_PROPRIETARY_KHR = VK_DRIVER_ID_ARM_PROPRIETARY,
  // Provided by VK_KHR_driver_properties
    VK_DRIVER_ID_GOOGLE_SWIFTSHADER_KHR = VK_DRIVER_ID_GOOGLE_SWIFTSHADER,
  // Provided by VK_KHR_driver_properties
    VK_DRIVER_ID_GGP_PROPRIETARY_KHR = VK_DRIVER_ID_GGP_PROPRIETARY,
  // Provided by VK_KHR_driver_properties
    VK_DRIVER_ID_BROADCOM_PROPRIETARY_KHR = VK_DRIVER_ID_BROADCOM_PROPRIETARY,
} VkDriverId;

or the equivalent

// Provided by VK_KHR_driver_properties
typedef VkDriverId VkDriverIdKHR;
Note

Khronos driver IDs may be allocated by vendors at any time. There may be multiple driver IDs for the same vendor, representing different drivers (for e.g. different platforms, proprietary or open source, etc.). Only the latest canonical versions of this Specification, of the corresponding vk.xml API Registry, and of the corresponding vulkan_core.h header file must contain all reserved Khronos driver IDs.

Only driver IDs registered with Khronos are given symbolic names. There may be unregistered driver IDs returned.

VK_MAX_DRIVER_NAME_SIZE is the length in char values of an array containing a driver name string, as returned in VkPhysicalDeviceDriverProperties::driverName.

#define VK_MAX_DRIVER_NAME_SIZE           256U

or the equivalent

#define VK_MAX_DRIVER_NAME_SIZE_KHR       VK_MAX_DRIVER_NAME_SIZE

VK_MAX_DRIVER_INFO_SIZE is the length in char values of an array containing a driver information string, as returned in VkPhysicalDeviceDriverProperties::driverInfo.

#define VK_MAX_DRIVER_INFO_SIZE           256U

or the equivalent

#define VK_MAX_DRIVER_INFO_SIZE_KHR       VK_MAX_DRIVER_INFO_SIZE

The conformance test suite version an implementation is compliant with is described with the VkConformanceVersion structure:

// Provided by VK_VERSION_1_2
typedef struct VkConformanceVersion {
    uint8_t    major;
    uint8_t    minor;
    uint8_t    subminor;
    uint8_t    patch;
} VkConformanceVersion;

or the equivalent

// Provided by VK_KHR_driver_properties
typedef VkConformanceVersion VkConformanceVersionKHR;
  • major is the major version number of the conformance test suite.

  • minor is the minor version number of the conformance test suite.

  • subminor is the subminor version number of the conformance test suite.

  • patch is the patch version number of the conformance test suite.

The VkPhysicalDevicePCIBusInfoPropertiesEXT structure is defined as:

// Provided by VK_EXT_pci_bus_info
typedef struct VkPhysicalDevicePCIBusInfoPropertiesEXT {
    VkStructureType    sType;
    void*              pNext;
    uint32_t           pciDomain;
    uint32_t           pciBus;
    uint32_t           pciDevice;
    uint32_t           pciFunction;
} VkPhysicalDevicePCIBusInfoPropertiesEXT;
  • sType is a VkStructureType value identifying this structure.

  • pNext is NULL or a pointer to a structure extending this structure.

  • pciDomain is the PCI bus domain.

  • pciBus is the PCI bus identifier.

  • pciDevice is the PCI device identifier.

  • pciFunction is the PCI device function identifier.

If the VkPhysicalDevicePCIBusInfoPropertiesEXT structure is included in the pNext chain of the VkPhysicalDeviceProperties2 structure passed to vkGetPhysicalDeviceProperties2, it is filled in with each corresponding implementation-dependent property.

These are properties of the PCI bus information of a physical device.

Valid Usage (Implicit)
  • VUID-VkPhysicalDevicePCIBusInfoPropertiesEXT-sType-sType
    sType must be VK_STRUCTURE_TYPE_PHYSICAL_DEVICE_PCI_BUS_INFO_PROPERTIES_EXT

The VkPhysicalDeviceDrmPropertiesEXT structure is defined as:

// Provided by VK_EXT_physical_device_drm
typedef struct VkPhysicalDeviceDrmPropertiesEXT {
    VkStructureType    sType;
    void*              pNext;
    VkBool32           hasPrimary;
    VkBool32           hasRender;
    int64_t            primaryMajor;
    int64_t            primaryMinor;
    int64_t            renderMajor;
    int64_t            renderMinor;
} VkPhysicalDeviceDrmPropertiesEXT;
  • sType is a VkStructureType value identifying this structure.

  • pNext is NULL or a pointer to a structure extending this structure.

  • hasPrimary is a boolean indicating whether the physical device has a DRM primary node.

  • hasRender is a boolean indicating whether the physical device has a DRM render node.

  • primaryMajor is the DRM primary node major number, if any.

  • primaryMinor is the DRM primary node minor number, if any.

  • renderMajor is the DRM render node major number, if any.

  • renderMinor is the DRM render node minor number, if any.

If the VkPhysicalDeviceDrmPropertiesEXT structure is included in the pNext chain of the VkPhysicalDeviceProperties2 structure passed to vkGetPhysicalDeviceProperties2, it is filled in with each corresponding implementation-dependent property.

These are properties of the DRM information of a physical device.

Valid Usage (Implicit)
  • VUID-VkPhysicalDeviceDrmPropertiesEXT-sType-sType
    sType must be VK_STRUCTURE_TYPE_PHYSICAL_DEVICE_DRM_PROPERTIES_EXT

The VkPhysicalDeviceShaderIntegerDotProductProperties structure is defined as:

// Provided by VK_VERSION_1_3
typedef struct VkPhysicalDeviceShaderIntegerDotProductProperties {
    VkStructureType    sType;
    void*              pNext;
    VkBool32           integerDotProduct8BitUnsignedAccelerated;
    VkBool32           integerDotProduct8BitSignedAccelerated;
    VkBool32           integerDotProduct8BitMixedSignednessAccelerated;
    VkBool32           integerDotProduct4x8BitPackedUnsignedAccelerated;
    VkBool32           integerDotProduct4x8BitPackedSignedAccelerated;
    VkBool32           integerDotProduct4x8BitPackedMixedSignednessAccelerated;
    VkBool32           integerDotProduct16BitUnsignedAccelerated;
    VkBool32           integerDotProduct16BitSignedAccelerated;
    VkBool32           integerDotProduct16BitMixedSignednessAccelerated;
    VkBool32           integerDotProduct32BitUnsignedAccelerated;
    VkBool32           integerDotProduct32BitSignedAccelerated;
    VkBool32           integerDotProduct32BitMixedSignednessAccelerated;
    VkBool32           integerDotProduct64BitUnsignedAccelerated;
    VkBool32           integerDotProduct64BitSignedAccelerated;
    VkBool32           integerDotProduct64BitMixedSignednessAccelerated;
    VkBool32           integerDotProductAccumulatingSaturating8BitUnsignedAccelerated;
    VkBool32           integerDotProductAccumulatingSaturating8BitSignedAccelerated;
    VkBool32           integerDotProductAccumulatingSaturating8BitMixedSignednessAccelerated;
    VkBool32           integerDotProductAccumulatingSaturating4x8BitPackedUnsignedAccelerated;
    VkBool32           integerDotProductAccumulatingSaturating4x8BitPackedSignedAccelerated;
    VkBool32           integerDotProductAccumulatingSaturating4x8BitPackedMixedSignednessAccelerated;
    VkBool32           integerDotProductAccumulatingSaturating16BitUnsignedAccelerated;
    VkBool32           integerDotProductAccumulatingSaturating16BitSignedAccelerated;
    VkBool32           integerDotProductAccumulatingSaturating16BitMixedSignednessAccelerated;
    VkBool32           integerDotProductAccumulatingSaturating32BitUnsignedAccelerated;
    VkBool32           integerDotProductAccumulatingSaturating32BitSignedAccelerated;
    VkBool32           integerDotProductAccumulatingSaturating32BitMixedSignednessAccelerated;
    VkBool32           integerDotProductAccumulatingSaturating64BitUnsignedAccelerated;
    VkBool32           integerDotProductAccumulatingSaturating64BitSignedAccelerated;
    VkBool32           integerDotProductAccumulatingSaturating64BitMixedSignednessAccelerated;
} VkPhysicalDeviceShaderIntegerDotProductProperties;

or the equivalent

// Provided by VK_KHR_shader_integer_dot_product
typedef VkPhysicalDeviceShaderIntegerDotProductProperties VkPhysicalDeviceShaderIntegerDotProductPropertiesKHR;
  • sType is a VkStructureType value identifying this structure.

  • pNext is NULL or a pointer to a structure extending this structure.

  • integerDotProduct8BitUnsignedAccelerated is a boolean that will be VK_TRUE if the support for 8-bit unsigned dot product operations using the OpUDotKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProduct8BitSignedAccelerated is a boolean that will be VK_TRUE if the support for 8-bit signed dot product operations using the OpSDotKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProduct8BitMixedSignednessAccelerated is a boolean that will be VK_TRUE if the support for 8-bit mixed signedness dot product operations using the OpSUDotKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProduct4x8BitPackedUnsignedAccelerated is a boolean that will be VK_TRUE if the support for 8-bit unsigned dot product operations from operands packed into 32-bit integers using the OpUDotKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProduct4x8BitPackedSignedAccelerated is a boolean that will be VK_TRUE if the support for 8-bit signed dot product operations from operands packed into 32-bit integers using the OpSDotKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProduct4x8BitPackedMixedSignednessAccelerated is a boolean that will be VK_TRUE if the support for 8-bit mixed signedness dot product operations from operands packed into 32-bit integers using the OpSUDotKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProduct16BitUnsignedAccelerated is a boolean that will be VK_TRUE if the support for 16-bit unsigned dot product operations using the OpUDotKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProduct16BitSignedAccelerated is a boolean that will be VK_TRUE if the support for 16-bit signed dot product operations using the OpSDotKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProduct16BitMixedSignednessAccelerated is a boolean that will be VK_TRUE if the support for 16-bit mixed signedness dot product operations using the OpSUDotKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProduct32BitUnsignedAccelerated is a boolean that will be VK_TRUE if the support for 32-bit unsigned dot product operations using the OpUDotKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProduct32BitSignedAccelerated is a boolean that will be VK_TRUE if the support for 32-bit signed dot product operations using the OpSDotKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProduct32BitMixedSignednessAccelerated is a boolean that will be VK_TRUE if the support for 32-bit mixed signedness dot product operations using the OpSUDotKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProduct64BitUnsignedAccelerated is a boolean that will be VK_TRUE if the support for 64-bit unsigned dot product operations using the OpUDotKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProduct64BitSignedAccelerated is a boolean that will be VK_TRUE if the support for 64-bit signed dot product operations using the OpSDotKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProduct64BitMixedSignednessAccelerated is a boolean that will be VK_TRUE if the support for 64-bit mixed signedness dot product operations using the OpSUDotKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProductAccumulatingSaturating8BitUnsignedAccelerated is a boolean that will be VK_TRUE if the support for 8-bit unsigned accumulating saturating dot product operations using the OpUDotAccSatKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProductAccumulatingSaturating8BitSignedAccelerated is a boolean that will be VK_TRUE if the support for 8-bit signed accumulating saturating dot product operations using the OpSDotAccSatKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProductAccumulatingSaturating8BitMixedSignednessAccelerated is a boolean that will be VK_TRUE if the support for 8-bit mixed signedness accumulating saturating dot product operations using the OpSUDotAccSatKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProductAccumulatingSaturating4x8BitPackedUnsignedAccelerated is a boolean that will be VK_TRUE if the support for 8-bit unsigned accumulating saturating dot product operations from operands packed into 32-bit integers using the OpUDotAccSatKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProductAccumulatingSaturating4x8BitPackedSignedAccelerated is a boolean that will be VK_TRUE if the support for 8-bit signed accumulating saturating dot product operations from operands packed into 32-bit integers using the OpSDotAccSatKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProductAccumulatingSaturating4x8BitPackedMixedSignednessAccelerated is a boolean that will be VK_TRUE if the support for 8-bit mixed signedness accumulating saturating dot product operations from operands packed into 32-bit integers using the OpSUDotAccSatKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProductAccumulatingSaturating16BitUnsignedAccelerated is a boolean that will be VK_TRUE if the support for 16-bit unsigned accumulating saturating dot product operations using the OpUDotAccSatKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProductAccumulatingSaturating16BitSignedAccelerated is a boolean that will be VK_TRUE if the support for 16-bit signed accumulating saturating dot product operations using the OpSDotAccSatKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProductAccumulatingSaturating16BitMixedSignednessAccelerated is a boolean that will be VK_TRUE if the support for 16-bit mixed signedness accumulating saturating dot product operations using the OpSUDotAccSatKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProductAccumulatingSaturating32BitUnsignedAccelerated is a boolean that will be VK_TRUE if the support for 32-bit unsigned accumulating saturating dot product operations using the OpUDotAccSatKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProductAccumulatingSaturating32BitSignedAccelerated is a boolean that will be VK_TRUE if the support for 32-bit signed accumulating saturating dot product operations using the OpSDotAccSatKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProductAccumulatingSaturating32BitMixedSignednessAccelerated is a boolean that will be VK_TRUE if the support for 32-bit mixed signedness accumulating saturating dot product operations using the OpSUDotAccSatKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProductAccumulatingSaturating64BitUnsignedAccelerated is a boolean that will be VK_TRUE if the support for 64-bit unsigned accumulating saturating dot product operations using the OpUDotAccSatKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProductAccumulatingSaturating64BitSignedAccelerated is a boolean that will be VK_TRUE if the support for 64-bit signed accumulating saturating dot product operations using the OpSDotAccSatKHR SPIR-V instruction is accelerated as defined below.

  • integerDotProductAccumulatingSaturating64BitMixedSignednessAccelerated is a boolean that will be VK_TRUE if the support for 64-bit mixed signedness accumulating saturating dot product operations using the OpSUDotAccSatKHR SPIR-V instruction is accelerated as defined below.

If the VkPhysicalDeviceShaderIntegerDotProductProperties structure is included in the pNext chain of the VkPhysicalDeviceProperties2 structure passed to vkGetPhysicalDeviceProperties2, it is filled in with each corresponding implementation-dependent property.

These are properties of the integer dot product acceleration information of a physical device.

Note

A dot product operation is deemed accelerated if its implementation provides a performance advantage over application-provided code composed from elementary instructions and/or other dot product instructions, either because the implementation uses optimized machine code sequences whose generation from application-provided code cannot be guaranteed or because it uses hardware features that cannot otherwise be targeted from application-provided code.

Valid Usage (Implicit)
  • VUID-VkPhysicalDeviceShaderIntegerDotProductProperties-sType-sType
    sType must be VK_STRUCTURE_TYPE_PHYSICAL_DEVICE_SHADER_INTEGER_DOT_PRODUCT_PROPERTIES

The VkPhysicalDeviceImageProcessingPropertiesQCOM structure is defined as:

// Provided by VK_QCOM_image_processing
typedef struct VkPhysicalDeviceImageProcessingPropertiesQCOM {
    VkStructureType    sType;
    void*              pNext;
    uint32_t           maxWeightFilterPhases;
    VkExtent2D         maxWeightFilterDimension;
    VkExtent2D         maxBlockMatchRegion;
    VkExtent2D         maxBoxFilterBlockSize;
} VkPhysicalDeviceImageProcessingPropertiesQCOM;

If the VkPhysicalDeviceImageProcessingPropertiesQCOM structure is included in the pNext chain of the VkPhysicalDeviceProperties2 structure passed to vkGetPhysicalDeviceProperties2, it is filled in with each corresponding implementation-dependent property.

These are properties of the image processing information of a physical device.

Valid Usage (Implicit)
  • VUID-VkPhysicalDeviceImageProcessingPropertiesQCOM-sType-sType
    sType must be VK_STRUCTURE_TYPE_PHYSICAL_DEVICE_IMAGE_PROCESSING_PROPERTIES_QCOM

To query properties of queues available on a physical device, call:

// Provided by VK_VERSION_1_0
void vkGetPhysicalDeviceQueueFamilyProperties(
    VkPhysicalDevice                            physicalDevice,
    uint32_t*                                   pQueueFamilyPropertyCount,
    VkQueueFamilyProperties*                    pQueueFamilyProperties);
  • physicalDevice is the handle to the physical device whose properties will be queried.

  • pQueueFamilyPropertyCount is a pointer to an integer related to the number of queue families available or queried, as described below.

  • pQueueFamilyProperties is either NULL or a pointer to an array of VkQueueFamilyProperties structures.

If pQueueFamilyProperties is NULL, then the number of queue families available is returned in pQueueFamilyPropertyCount. Implementations must support at least one queue family. Otherwise, pQueueFamilyPropertyCount must point to a variable set by the user to the number of elements in the pQueueFamilyProperties array, and on return the variable is overwritten with the number of structures actually written to pQueueFamilyProperties. If pQueueFamilyPropertyCount is less than the number of queue families available, at most pQueueFamilyPropertyCount structures will be written.

Valid Usage (Implicit)
  • VUID-vkGetPhysicalDeviceQueueFamilyProperties-physicalDevice-parameter
    physicalDevice must be a valid VkPhysicalDevice handle

  • VUID-vkGetPhysicalDeviceQueueFamilyProperties-pQueueFamilyPropertyCount-parameter
    pQueueFamilyPropertyCount must be a valid pointer to a uint32_t value

  • VUID-vkGetPhysicalDeviceQueueFamilyProperties-pQueueFamilyProperties-parameter
    If the value referenced by pQueueFamilyPropertyCount is not 0, and pQueueFamilyProperties is not NULL, pQueueFamilyProperties must be a valid pointer to an array of pQueueFamilyPropertyCount VkQueueFamilyProperties structures

The VkQueueFamilyProperties structure is defined as:

// Provided by VK_VERSION_1_0
typedef struct VkQueueFamilyProperties {
    VkQueueFlags    queueFlags;
    uint32_t        queueCount;
    uint32_t        timestampValidBits;
    VkExtent3D      minImageTransferGranularity;
} VkQueueFamilyProperties;
  • queueFlags is a bitmask of VkQueueFlagBits indicating capabilities of the queues in this queue family.

  • queueCount is the unsigned integer count of queues in this queue family. Each queue family must support at least one queue.

  • timestampValidBits is the unsigned integer count of meaningful bits in the timestamps written via vkCmdWriteTimestamp2 or vkCmdWriteTimestamp. The valid range for the count is 36 to 64 bits, or a value of 0, indicating no support for timestamps. Bits outside the valid range are guaranteed to be zeros.

  • minImageTransferGranularity is the minimum granularity supported for image transfer operations on the queues in this queue family.

The value returned in minImageTransferGranularity has a unit of compressed texel blocks for images having a block-compressed format, and a unit of texels otherwise.

Possible values of minImageTransferGranularity are:

  • (0,0,0) specifies that only whole mip levels must be transferred using the image transfer operations on the corresponding queues. In this case, the following restrictions apply to all offset and extent parameters of image transfer operations:

    • The x, y, and z members of a VkOffset3D parameter must always be zero.

    • The width, height, and depth members of a VkExtent3D parameter must always match the width, height, and depth of the image subresource corresponding to the parameter, respectively.

  • (Ax, Ay, Az) where Ax, Ay, and Az are all integer powers of two. In this case the following restrictions apply to all image transfer operations:

    • x, y, and z of a VkOffset3D parameter must be integer multiples of Ax, Ay, and Az, respectively.

    • width of a VkExtent3D parameter must be an integer multiple of Ax, or else x + width must equal the width of the image subresource corresponding to the parameter.

    • height of a VkExtent3D parameter must be an integer multiple of Ay, or else y + height must equal the height of the image subresource corresponding to the parameter.

    • depth of a VkExtent3D parameter must be an integer multiple of Az, or else z + depth must equal the depth of the image subresource corresponding to the parameter.

    • If the format of the image corresponding to the parameters is one of the block-compressed formats then for the purposes of the above calculations the granularity must be scaled up by the compressed texel block dimensions.

Queues supporting graphics and/or compute operations must report (1,1,1) in minImageTransferGranularity, meaning that there are no additional restrictions on the granularity of image transfer operations for these queues. Other queues supporting image transfer operations are only required to support whole mip level transfers, thus minImageTransferGranularity for queues belonging to such queue families may be (0,0,0).

The Device Memory section describes memory properties queried from the physical device.

For physical device feature queries see the Features chapter.

Bits which may be set in VkQueueFamilyProperties::queueFlags, indicating capabilities of queues in a queue family are:

// Provided by VK_VERSION_1_0
typedef enum VkQueueFlagBits {
    VK_QUEUE_GRAPHICS_BIT = 0x00000001,
    VK_QUEUE_COMPUTE_BIT = 0x00000002,
    VK_QUEUE_TRANSFER_BIT = 0x00000004,
    VK_QUEUE_SPARSE_BINDING_BIT = 0x00000008,
  // Provided by VK_VERSION_1_1
    VK_QUEUE_PROTECTED_BIT = 0x00000010,
  // Provided by VK_KHR_video_decode_queue
    VK_QUEUE_VIDEO_DECODE_BIT_KHR = 0x00000020,
#ifdef VK_ENABLE_BETA_EXTENSIONS
  // Provided by VK_KHR_video_encode_queue
    VK_QUEUE_VIDEO_ENCODE_BIT_KHR = 0x00000040,
#endif
  // Provided by VK_NV_optical_flow
    VK_QUEUE_OPTICAL_FLOW_BIT_NV = 0x00000100,
} VkQueueFlagBits;
  • VK_QUEUE_GRAPHICS_BIT specifies that queues in this queue family support graphics operations.

  • VK_QUEUE_COMPUTE_BIT specifies that queues in this queue family support compute operations.

  • VK_QUEUE_TRANSFER_BIT specifies that queues in this queue family support transfer operations.

  • VK_QUEUE_SPARSE_BINDING_BIT specifies that queues in this queue family support sparse memory management operations (see Sparse Resources). If any of the sparse resource features are enabled, then at least one queue family must support this bit.

  • VK_QUEUE_VIDEO_DECODE_BIT_KHR specifies that queues in this queue family support video decode operations.

  • VK_QUEUE_VIDEO_ENCODE_BIT_KHR specifies that queues in this queue family support video encode operations.

  • VK_QUEUE_OPTICAL_FLOW_BIT_NV specifies that queues in this queue family support optical flow operations.

  • VK_QUEUE_PROTECTED_BIT specifies that queues in this queue family support the VK_DEVICE_QUEUE_CREATE_PROTECTED_BIT bit. (see Protected Memory). If the physical device supports the protectedMemory feature, at least one of its queue families must support this bit.

If an implementation exposes any queue family that supports graphics operations, at least one queue family of at least one physical device exposed by the implementation must support both graphics and compute operations.

Furthermore, if the protectedMemory physical device feature is supported, then at least one queue family of at least one physical device exposed by the implementation must support graphics operations, compute operations, and protected memory operations.

Note

All commands that are allowed on a queue that supports transfer operations are also allowed on a queue that supports either graphics or compute operations. Thus, if the capabilities of a queue family include VK_QUEUE_GRAPHICS_BIT or VK_QUEUE_COMPUTE_BIT, then reporting the VK_QUEUE_TRANSFER_BIT capability separately for that queue family is optional.

For further details see Queues.

// Provided by VK_VERSION_1_0
typedef VkFlags VkQueueFlags;

VkQueueFlags is a bitmask type for setting a mask of zero or more VkQueueFlagBits.

To query properties of queues available on a physical device, call:

// Provided by VK_VERSION_1_1
void vkGetPhysicalDeviceQueueFamilyProperties2(
    VkPhysicalDevice                            physicalDevice,
    uint32_t*                                   pQueueFamilyPropertyCount,
    VkQueueFamilyProperties2*                   pQueueFamilyProperties);

or the equivalent command

// Provided by VK_KHR_get_physical_device_properties2
void vkGetPhysicalDeviceQueueFamilyProperties2KHR(
    VkPhysicalDevice                            physicalDevice,
    uint32_t*                                   pQueueFamilyPropertyCount,
    VkQueueFamilyProperties2*                   pQueueFamilyProperties);
  • physicalDevice is the handle to the physical device whose properties will be queried.

  • pQueueFamilyPropertyCount is a pointer to an integer related to the number of queue families available or queried, as described in vkGetPhysicalDeviceQueueFamilyProperties.

  • pQueueFamilyProperties is either NULL or a pointer to an array of VkQueueFamilyProperties2 structures.

vkGetPhysicalDeviceQueueFamilyProperties2 behaves similarly to vkGetPhysicalDeviceQueueFamilyProperties, with the ability to return extended information in a pNext chain of output structures.

Valid Usage (Implicit)
  • VUID-vkGetPhysicalDeviceQueueFamilyProperties2-physicalDevice-parameter
    physicalDevice must be a valid VkPhysicalDevice handle

  • VUID-vkGetPhysicalDeviceQueueFamilyProperties2-pQueueFamilyPropertyCount-parameter
    pQueueFamilyPropertyCount must be a valid pointer to a uint32_t value

  • VUID-vkGetPhysicalDeviceQueueFamilyProperties2-pQueueFamilyProperties-parameter
    If the value referenced by pQueueFamilyPropertyCount is not 0, and pQueueFamilyProperties is not NULL, pQueueFamilyProperties must be a valid pointer to an array of pQueueFamilyPropertyCount VkQueueFamilyProperties2 structures

The VkQueueFamilyProperties2 structure is defined as:

// Provided by VK_VERSION_1_1
typedef struct VkQueueFamilyProperties2 {
    VkStructureType            sType;
    void*                      pNext;
    VkQueueFamilyProperties    queueFamilyProperties;
} VkQueueFamilyProperties2;

or the equivalent

// Provided by VK_KHR_get_physical_device_properties2
typedef VkQueueFamilyProperties2 VkQueueFamilyProperties2KHR;
Valid Usage (Implicit)
// Provided by VK_KHR_global_priority
typedef struct VkQueueFamilyGlobalPriorityPropertiesKHR {
    VkStructureType             sType;
    void*                       pNext;
    uint32_t                    priorityCount;
    VkQueueGlobalPriorityKHR    priorities[VK_MAX_GLOBAL_PRIORITY_SIZE_KHR];
} VkQueueFamilyGlobalPriorityPropertiesKHR;

or the equivalent

// Provided by VK_EXT_global_priority_query
typedef VkQueueFamilyGlobalPriorityPropertiesKHR VkQueueFamilyGlobalPriorityPropertiesEXT;
  • sType is a VkStructureType value identifying this structure.

  • pNext is NULL or a pointer to a structure extending this structure.

  • priorityCount is the number of supported global queue priorities in this queue family, and it must be greater than 0.

  • priorities is an array of VK_MAX_GLOBAL_PRIORITY_SIZE_EXT VkQueueGlobalPriorityEXT enums representing all supported global queue priorities in this queue family. The first priorityCount elements of the array will be valid.

If the VkQueueFamilyGlobalPriorityPropertiesKHR structure is included in the pNext chain of the VkQueueFamilyProperties2 structure passed to vkGetPhysicalDeviceQueueFamilyProperties2, it is filled in with the list of supported global queue priorities for the indicated family.

The valid elements of priorities must not contain any duplicate values.

The valid elements of priorities must be a continuous sequence of VkQueueGlobalPriorityKHR enums in the ascending order.

Note

For example, returning priorityCount as 3 with supported priorities as VK_QUEUE_GLOBAL_PRIORITY_LOW_KHR, VK_QUEUE_GLOBAL_PRIORITY_MEDIUM_KHR and VK_QUEUE_GLOBAL_PRIORITY_REALTIME_KHR is not allowed.

Valid Usage (Implicit)
  • VUID-VkQueueFamilyGlobalPriorityPropertiesKHR-sType-sType
    sType must be VK_STRUCTURE_TYPE_QUEUE_FAMILY_GLOBAL_PRIORITY_PROPERTIES_KHR

  • VUID-VkQueueFamilyGlobalPriorityPropertiesKHR-priorities-parameter
    Each element of priorities must be a valid VkQueueGlobalPriorityKHR value

VK_MAX_GLOBAL_PRIORITY_SIZE_KHR is the length of an array of VkQueueGlobalPriorityKHR enumerants representing supported queue priorities, as returned in VkQueueFamilyGlobalPriorityPropertiesKHR::priorities.

#define VK_MAX_GLOBAL_PRIORITY_SIZE_KHR   16U

or the equivalent

#define VK_MAX_GLOBAL_PRIORITY_SIZE_EXT   VK_MAX_GLOBAL_PRIORITY_SIZE_KHR

The VkQueueFamilyCheckpointProperties2NV structure is defined as:

// Provided by VK_KHR_synchronization2 with VK_NV_device_diagnostic_checkpoints
typedef struct VkQueueFamilyCheckpointProperties2NV {
    VkStructureType          sType;
    void*                    pNext;
    VkPipelineStageFlags2    checkpointExecutionStageMask;
} VkQueueFamilyCheckpointProperties2NV;
  • sType is a VkStructureType value identifying this structure.

  • pNext is NULL or a pointer to a structure extending this structure.

  • checkpointExecutionStageMask is a mask indicating which pipeline stages the implementation can execute checkpoint markers in.

Additional queue family information can be queried by setting VkQueueFamilyProperties2::pNext to point to a VkQueueFamilyCheckpointProperties2NV structure.

Valid Usage (Implicit)
  • VUID-VkQueueFamilyCheckpointProperties2NV-sType-sType
    sType must be VK_STRUCTURE_TYPE_QUEUE_FAMILY_CHECKPOINT_PROPERTIES_2_NV

The VkQueueFamilyCheckpointPropertiesNV structure is defined as:

// Provided by VK_NV_device_diagnostic_checkpoints
typedef struct VkQueueFamilyCheckpointPropertiesNV {
    VkStructureType         sType;
    void*                   pNext;
    VkPipelineStageFlags    checkpointExecutionStageMask;
} VkQueueFamilyCheckpointPropertiesNV;
  • sType is a VkStructureType value identifying this structure.

  • pNext is NULL or a pointer to a structure extending this structure.

  • checkpointExecutionStageMask is a mask indicating which pipeline stages the implementation can execute checkpoint markers in.

Additional queue family information can be queried by setting VkQueueFamilyProperties2::pNext to point to a VkQueueFamilyCheckpointPropertiesNV structure.

Valid Usage (Implicit)
  • VUID-VkQueueFamilyCheckpointPropertiesNV-sType-sType
    sType must be VK_STRUCTURE_TYPE_QUEUE_FAMILY_CHECKPOINT_PROPERTIES_NV

The VkQueueFamilyVideoPropertiesKHR structure is defined as:

// Provided by VK_KHR_video_queue
typedef struct VkQueueFamilyVideoPropertiesKHR {
    VkStructureType                  sType;
    void*                            pNext;
    VkVideoCodecOperationFlagsKHR    videoCodecOperations;
} VkQueueFamilyVideoPropertiesKHR;
  • sType is a VkStructureType value identifying this structure.

  • pNext is NULL or a pointer to a structure extending this structure.

  • videoCodecOperations is a bitmask of VkVideoCodecOperationFlagBitsKHR that indicates the set of video codec operations supported by the queue family.

If this structure is included in the pNext chain of the VkQueueFamilyProperties2 structure passed to vkGetPhysicalDeviceQueueFamilyProperties2, then it is filled with the set of video codec operations supported by the specified queue family.

Valid Usage (Implicit)
  • VUID-VkQueueFamilyVideoPropertiesKHR-sType-sType
    sType must be VK_STRUCTURE_TYPE_QUEUE_FAMILY_VIDEO_PROPERTIES_KHR

The VkQueueFamilyQueryResultStatusPropertiesKHR structure is defined as:

// Provided by VK_KHR_video_queue
typedef struct VkQueueFamilyQueryResultStatusPropertiesKHR {
    VkStructureType    sType;
    void*              pNext;
    VkBool32           queryResultStatusSupport;
} VkQueueFamilyQueryResultStatusPropertiesKHR;
  • sType is a VkStructureType value identifying this structure.

  • pNext is NULL or a pointer to a structure extending this structure.

  • queryResultStatusSupport reports VK_TRUE if query type VK_QUERY_TYPE_RESULT_STATUS_ONLY_KHR and use of VK_QUERY_RESULT_WITH_STATUS_BIT_KHR are supported.

If this structure is included in the pNext chain of the VkQueueFamilyProperties2 structure passed to vkGetPhysicalDeviceQueueFamilyProperties2, then it is filled with information about whether result status queries are supported by the specified queue family.

Valid Usage (Implicit)
  • VUID-VkQueueFamilyQueryResultStatusPropertiesKHR-sType-sType
    sType must be VK_STRUCTURE_TYPE_QUEUE_FAMILY_QUERY_RESULT_STATUS_PROPERTIES_KHR

To enumerate the performance query counters available on a queue family of a physical device, call:

// Provided by VK_KHR_performance_query
VkResult vkEnumeratePhysicalDeviceQueueFamilyPerformanceQueryCountersKHR(
    VkPhysicalDevice                            physicalDevice,
    uint32_t                                    queueFamilyIndex,
    uint32_t*                                   pCounterCount,
    VkPerformanceCounterKHR*                    pCounters,
    VkPerformanceCounterDescriptionKHR*         pCounterDescriptions);
  • physicalDevice is the handle to the physical device whose queue family performance query counter properties will be queried.

  • queueFamilyIndex is the index into the queue family of the physical device we want to get properties for.

  • pCounterCount is a pointer to an integer related to the number of counters available or queried, as described below.

  • pCounters is either NULL or a pointer to an array of VkPerformanceCounterKHR structures.

  • pCounterDescriptions is either NULL or a pointer to an array of VkPerformanceCounterDescriptionKHR structures.

If pCounters is NULL and pCounterDescriptions is NULL, then the number of counters available is returned in pCounterCount. Otherwise, pCounterCount must point to a variable set by the user to the number of elements in the pCounters, pCounterDescriptions, or both arrays and on return the variable is overwritten with the number of structures actually written out. If pCounterCount is less than the number of counters available, at most pCounterCount structures will be written, and VK_INCOMPLETE will be returned instead of VK_SUCCESS, to indicate that not all the available counters were returned.

Valid Usage (Implicit)
  • VUID-vkEnumeratePhysicalDeviceQueueFamilyPerformanceQueryCountersKHR-physicalDevice-parameter
    physicalDevice must be a valid VkPhysicalDevice handle

  • VUID-vkEnumeratePhysicalDeviceQueueFamilyPerformanceQueryCountersKHR-pCounterCount-parameter
    pCounterCount must be a valid pointer to a uint32_t value

  • VUID-vkEnumeratePhysicalDeviceQueueFamilyPerformanceQueryCountersKHR-pCounters-parameter
    If the value referenced by pCounterCount is not 0, and pCounters is not NULL, pCounters must be a valid pointer to an array of pCounterCount VkPerformanceCounterKHR structures

  • VUID-vkEnumeratePhysicalDeviceQueueFamilyPerformanceQueryCountersKHR-pCounterDescriptions-parameter
    If the value referenced by pCounterCount is not 0, and pCounterDescriptions is not NULL, pCounterDescriptions must be a valid pointer to an array of pCounterCount VkPerformanceCounterDescriptionKHR structures

Return Codes
Success
  • VK_SUCCESS

  • VK_INCOMPLETE

Failure
  • VK_ERROR_OUT_OF_HOST_MEMORY

  • VK_ERROR_OUT_OF_DEVICE_MEMORY

  • VK_ERROR_INITIALIZATION_FAILED

The VkPerformanceCounterKHR structure is defined as:

// Provided by VK_KHR_performance_query
typedef struct VkPerformanceCounterKHR {
    VkStructureType                   sType;
    void*                             pNext;
    VkPerformanceCounterUnitKHR       unit;
    VkPerformanceCounterScopeKHR      scope;
    VkPerformanceCounterStorageKHR    storage;
    uint8_t                           uuid[VK_UUID_SIZE];
} VkPerformanceCounterKHR;
  • sType is a VkStructureType value identifying this structure.

  • pNext is NULL or a pointer to a structure extending this structure.

  • unit is a VkPerformanceCounterUnitKHR specifying the unit that the counter data will record.

  • scope is a VkPerformanceCounterScopeKHR specifying the scope that the counter belongs to.

  • storage is a VkPerformanceCounterStorageKHR specifying the storage type that the counter’s data uses.

  • uuid is an array of size VK_UUID_SIZE, containing 8-bit values that represent a universally unique identifier for the counter of the physical device.

Valid Usage (Implicit)
  • VUID-VkPerformanceCounterKHR-sType-sType
    sType must be VK_STRUCTURE_TYPE_PERFORMANCE_COUNTER_KHR

  • VUID-VkPerformanceCounterKHR-pNext-pNext
    pNext must be NULL

Performance counters have an associated unit. This unit describes how to interpret the performance counter result.

The performance counter unit types which may be returned in VkPerformanceCounterKHR::unit are:

// Provided by VK_KHR_performance_query
typedef enum VkPerformanceCounterUnitKHR {
    VK_PERFORMANCE_COUNTER_UNIT_GENERIC_KHR = 0,
    VK_PERFORMANCE_COUNTER_UNIT_PERCENTAGE_KHR = 1,
    VK_PERFORMANCE_COUNTER_UNIT_NANOSECONDS_KHR = 2,
    VK_PERFORMANCE_COUNTER_UNIT_BYTES_KHR = 3,
    VK_PERFORMANCE_COUNTER_UNIT_BYTES_PER_SECOND_KHR = 4,
    VK_PERFORMANCE_COUNTER_UNIT_KELVIN_KHR = 5,
    VK_PERFORMANCE_COUNTER_UNIT_WATTS_KHR = 6,
    VK_PERFORMANCE_COUNTER_UNIT_VOLTS_KHR = 7,
    VK_PERFORMANCE_COUNTER_UNIT_AMPS_KHR = 8,
    VK_PERFORMANCE_COUNTER_UNIT_HERTZ_KHR = 9,
    VK_PERFORMANCE_COUNTER_UNIT_CYCLES_KHR = 10,
} VkPerformanceCounterUnitKHR;
  • VK_PERFORMANCE_COUNTER_UNIT_GENERIC_KHR - the performance counter unit is a generic data point.

  • VK_PERFORMANCE_COUNTER_UNIT_PERCENTAGE_KHR - the performance counter unit is a percentage (%).

  • VK_PERFORMANCE_COUNTER_UNIT_NANOSECONDS_KHR - the performance counter unit is a value of nanoseconds (ns).

  • VK_PERFORMANCE_COUNTER_UNIT_BYTES_KHR - the performance counter unit is a value of bytes.

  • VK_PERFORMANCE_COUNTER_UNIT_BYTES_PER_SECOND_KHR - the performance counter unit is a value of bytes/s.

  • VK_PERFORMANCE_COUNTER_UNIT_KELVIN_KHR - the performance counter unit is a temperature reported in Kelvin.

  • VK_PERFORMANCE_COUNTER_UNIT_WATTS_KHR - the performance counter unit is a value of watts (W).

  • VK_PERFORMANCE_COUNTER_UNIT_VOLTS_KHR - the performance counter unit is a value of volts (V).

  • VK_PERFORMANCE_COUNTER_UNIT_AMPS_KHR - the performance counter unit is a value of amps (A).

  • VK_PERFORMANCE_COUNTER_UNIT_HERTZ_KHR - the performance counter unit is a value of hertz (Hz).

  • VK_PERFORMANCE_COUNTER_UNIT_CYCLES_KHR - the performance counter unit is a value of cycles.

Performance counters have an associated scope. This scope describes the granularity of a performance counter.

The performance counter scope types which may be returned in VkPerformanceCounterKHR::scope are:

// Provided by VK_KHR_performance_query
typedef enum VkPerformanceCounterScopeKHR {
    VK_PERFORMANCE_COUNTER_SCOPE_COMMAND_BUFFER_KHR = 0,
    VK_PERFORMANCE_COUNTER_SCOPE_RENDER_PASS_KHR = 1,
    VK_PERFORMANCE_COUNTER_SCOPE_COMMAND_KHR = 2,
    VK_QUERY_SCOPE_COMMAND_BUFFER_KHR = VK_PERFORMANCE_COUNTER_SCOPE_COMMAND_BUFFER_KHR,
    VK_QUERY_SCOPE_RENDER_PASS_KHR = VK_PERFORMANCE_COUNTER_SCOPE_RENDER_PASS_KHR,
    VK_QUERY_SCOPE_COMMAND_KHR = VK_PERFORMANCE_COUNTER_SCOPE_COMMAND_KHR,
} VkPerformanceCounterScopeKHR;
  • VK_PERFORMANCE_COUNTER_SCOPE_COMMAND_BUFFER_KHR - the performance counter scope is a single complete command buffer.

  • VK_PERFORMANCE_COUNTER_SCOPE_RENDER_PASS_KHR - the performance counter scope is zero or more complete render passes. The performance query containing the performance counter must begin and end outside a render pass instance.

  • VK_PERFORMANCE_COUNTER_SCOPE_COMMAND_KHR - the performance counter scope is zero or more commands.

Performance counters have an associated storage. This storage describes the payload of a counter result.

The performance counter storage types which may be returned in VkPerformanceCounterKHR::storage are:

// Provided by VK_KHR_performance_query
typedef enum VkPerformanceCounterStorageKHR {
    VK_PERFORMANCE_COUNTER_STORAGE_INT32_KHR = 0,
    VK_PERFORMANCE_COUNTER_STORAGE_INT64_KHR = 1,
    VK_PERFORMANCE_COUNTER_STORAGE_UINT32_KHR = 2,
    VK_PERFORMANCE_COUNTER_STORAGE_UINT64_KHR = 3,
    VK_PERFORMANCE_COUNTER_STORAGE_FLOAT32_KHR = 4,
    VK_PERFORMANCE_COUNTER_STORAGE_FLOAT64_KHR = 5,
} VkPerformanceCounterStorageKHR;
  • VK_PERFORMANCE_COUNTER_STORAGE_INT32_KHR - the performance counter storage is a 32-bit signed integer.

  • VK_PERFORMANCE_COUNTER_STORAGE_INT64_KHR - the performance counter storage is a 64-bit signed integer.

  • VK_PERFORMANCE_COUNTER_STORAGE_UINT32_KHR - the performance counter storage is a 32-bit unsigned integer.

  • VK_PERFORMANCE_COUNTER_STORAGE_UINT64_KHR - the performance counter storage is a 64-bit unsigned integer.

  • VK_PERFORMANCE_COUNTER_STORAGE_FLOAT32_KHR - the performance counter storage is a 32-bit floating-point.

  • VK_PERFORMANCE_COUNTER_STORAGE_FLOAT64_KHR - the performance counter storage is a 64-bit floating-point.

The VkPerformanceCounterDescriptionKHR structure is defined as:

// Provided by VK_KHR_performance_query
typedef struct VkPerformanceCounterDescriptionKHR {
    VkStructureType                            sType;
    void*                                      pNext;
    VkPerformanceCounterDescriptionFlagsKHR    flags;
    char                                       name[VK_MAX_DESCRIPTION_SIZE];
    char                                       category[VK_MAX_DESCRIPTION_SIZE];
    char                                       description[VK_MAX_DESCRIPTION_SIZE];
} VkPerformanceCounterDescriptionKHR;
  • sType is a VkStructureType value identifying this structure.

  • pNext is NULL or a pointer to a structure extending this structure.

  • flags is a bitmask of VkPerformanceCounterDescriptionFlagBitsKHR indicating the usage behavior for the counter.

  • name is an array of size VK_MAX_DESCRIPTION_SIZE, containing a null-terminated UTF-8 string specifying the name of the counter.

  • category is an array of size VK_MAX_DESCRIPTION_SIZE, containing a null-terminated UTF-8 string specifying the category of the counter.

  • description is an array of size VK_MAX_DESCRIPTION_SIZE, containing a null-terminated UTF-8 string specifying the description of the counter.

Valid Usage (Implicit)
  • VUID-VkPerformanceCounterDescriptionKHR-sType-sType
    sType must be VK_STRUCTURE_TYPE_PERFORMANCE_COUNTER_DESCRIPTION_KHR

  • VUID-VkPerformanceCounterDescriptionKHR-pNext-pNext
    pNext must be NULL

Bits which can be set in VkPerformanceCounterDescriptionKHR::flags, specifying usage behavior of a performance counter, are:

// Provided by VK_KHR_performance_query
typedef enum VkPerformanceCounterDescriptionFlagBitsKHR {
    VK_PERFORMANCE_COUNTER_DESCRIPTION_PERFORMANCE_IMPACTING_BIT_KHR = 0x00000001,
    VK_PERFORMANCE_COUNTER_DESCRIPTION_CONCURRENTLY_IMPACTED_BIT_KHR = 0x00000002,
    VK_PERFORMANCE_COUNTER_DESCRIPTION_PERFORMANCE_IMPACTING_KHR = VK_PERFORMANCE_COUNTER_DESCRIPTION_PERFORMANCE_IMPACTING_BIT_KHR,
    VK_PERFORMANCE_COUNTER_DESCRIPTION_CONCURRENTLY_IMPACTED_KHR = VK_PERFORMANCE_COUNTER_DESCRIPTION_CONCURRENTLY_IMPACTED_BIT_KHR,
} VkPerformanceCounterDescriptionFlagBitsKHR;
  • VK_PERFORMANCE_COUNTER_DESCRIPTION_PERFORMANCE_IMPACTING_BIT_KHR specifies that recording the counter may have a noticeable performance impact.

  • VK_PERFORMANCE_COUNTER_DESCRIPTION_CONCURRENTLY_IMPACTED_BIT_KHR specifies that concurrently recording the counter while other submitted command buffers are running may impact the accuracy of the recording.

// Provided by VK_KHR_performance_query
typedef VkFlags VkPerformanceCounterDescriptionFlagsKHR;

VkPerformanceCounterDescriptionFlagsKHR is a bitmask type for setting a mask of zero or more VkPerformanceCounterDescriptionFlagBitsKHR.

5.2. Devices

Device objects represent logical connections to physical devices. Each device exposes a number of queue families each having one or more queues. All queues in a queue family support the same operations.

As described in Physical Devices, a Vulkan application will first query for all physical devices in a system. Each physical device can then be queried for its capabilities, including its queue and queue family properties. Once an acceptable physical device is identified, an application will create a corresponding logical device. The created logical device is then the primary interface to the physical device.

How to enumerate the physical devices in a system and query those physical devices for their queue family properties is described in the Physical Device Enumeration section above.

A single logical device can be created from multiple physical devices, if those physical devices belong to the same device group. A device group is a set of physical devices that support accessing each other’s memory and recording a single command buffer that can be executed on all the physical devices. Device groups are enumerated by calling vkEnumeratePhysicalDeviceGroups, and a logical device is created from a subset of the physical devices in a device group by passing the physical devices through VkDeviceGroupDeviceCreateInfo. For two physical devices to be in the same device group, they must support identical extensions, features, and properties.

Note

Physical devices in the same device group must be so similar because there are no rules for how different features/properties would interact. They must return the same values for nearly every invariant vkGetPhysicalDevice* feature, property, capability, etc., but could potentially differ for certain queries based on things like having a different display connected, or a different compositor. The specification does not attempt to enumerate which state is in each category, because such a list would quickly become out of date.

To retrieve a list of the device groups present in the system, call:

// Provided by VK_VERSION_1_1
VkResult vkEnumeratePhysicalDeviceGroups(
    VkInstance                                  instance,
    uint32_t*                                   pPhysicalDeviceGroupCount,
    VkPhysicalDeviceGroupProperties*            pPhysicalDeviceGroupProperties);

or the equivalent command

// Provided by VK_KHR_device_group_creation
VkResult vkEnumeratePhysicalDeviceGroupsKHR(
    VkInstance                                  instance,
    uint32_t*                                   pPhysicalDeviceGroupCount,
    VkPhysicalDeviceGroupProperties*            pPhysicalDeviceGroupProperties);
  • instance is a handle to a Vulkan instance previously created with vkCreateInstance.

  • pPhysicalDeviceGroupCount is a pointer to an integer related to the number of device groups available or queried, as described below.

  • pPhysicalDeviceGroupProperties is either NULL or a pointer to an array of VkPhysicalDeviceGroupProperties structures.

If pPhysicalDeviceGroupProperties is NULL, then the number of device groups available is returned in pPhysicalDeviceGroupCount. Otherwise, pPhysicalDeviceGroupCount must point to a variable set by the user to the number of elements in the pPhysicalDeviceGroupProperties array, and on return the variable is overwritten with the number of structures actually written to pPhysicalDeviceGroupProperties. If pPhysicalDeviceGroupCount is less than the number of device groups available, at most pPhysicalDeviceGroupCount structures will be written, and VK_INCOMPLETE will be returned instead of VK_SUCCESS, to indicate that not all the available device groups were returned.

Every physical device must be in exactly one device group.

Valid Usage (Implicit)
  • VUID-vkEnumeratePhysicalDeviceGroups-instance-parameter
    instance must be a valid VkInstance handle

  • VUID-vkEnumeratePhysicalDeviceGroups-pPhysicalDeviceGroupCount-parameter
    pPhysicalDeviceGroupCount must be a valid pointer to a uint32_t value

  • VUID-vkEnumeratePhysicalDeviceGroups-pPhysicalDeviceGroupProperties-parameter
    If the value referenced by pPhysicalDeviceGroupCount is not 0, and pPhysicalDeviceGroupProperties is not NULL, pPhysicalDeviceGroupProperties must be a valid pointer to an array of pPhysicalDeviceGroupCount VkPhysicalDeviceGroupProperties structures

Return Codes
Success
  • VK_SUCCESS

  • VK_INCOMPLETE

Failure
  • VK_ERROR_OUT_OF_HOST_MEMORY

  • VK_ERROR_OUT_OF_DEVICE_MEMORY

  • VK_ERROR_INITIALIZATION_FAILED

The VkPhysicalDeviceGroupProperties structure is defined as:

// Provided by VK_VERSION_1_1
typedef struct VkPhysicalDeviceGroupProperties {
    VkStructureType     sType;
    void*               pNext;
    uint32_t            physicalDeviceCount;
    VkPhysicalDevice    physicalDevices[VK_MAX_DEVICE_GROUP_SIZE];
    VkBool32            subsetAllocation;
} VkPhysicalDeviceGroupProperties;

or the equivalent

// Provided by VK_KHR_device_group_creation
typedef VkPhysicalDeviceGroupProperties VkPhysicalDeviceGroupPropertiesKHR;
  • sType is a VkStructureType value identifying this structure.

  • pNext is NULL or a pointer to a structure extending this structure.

  • physicalDeviceCount is the number of physical devices in the group.

  • physicalDevices is an array of VK_MAX_DEVICE_GROUP_SIZE VkPhysicalDevice handles representing all physical devices in the group. The first physicalDeviceCount elements of the array will be valid.

  • subsetAllocation specifies whether logical devices created from the group support allocating device memory on a subset of devices, via the deviceMask member of the VkMemoryAllocateFlagsInfo. If this is VK_FALSE, then all device memory allocations are made across all physical devices in the group. If physicalDeviceCount is 1, then subsetAllocation must be VK_FALSE.

Valid Usage (Implicit)
  • VUID-VkPhysicalDeviceGroupProperties-sType-sType
    sType must be VK_STRUCTURE_TYPE_PHYSICAL_DEVICE_GROUP_PROPERTIES

  • VUID-VkPhysicalDeviceGroupProperties-pNext-pNext
    pNext must be NULL

VK_MAX_DEVICE_GROUP_SIZE is the length of an array containing VkPhysicalDevice handle values representing all physical devices in a group, as returned in VkPhysicalDeviceGroupProperties::physicalDevices.

#define VK_MAX_DEVICE_GROUP_SIZE          32U

or the equivalent

#define VK_MAX_DEVICE_GROUP_SIZE_KHR      VK_MAX_DEVICE_GROUP_SIZE

5.2.1. Device Creation

Logical devices are represented by VkDevice handles:

// Provided by VK_VERSION_1_0
VK_DEFINE_HANDLE(VkDevice)

A logical device is created as a connection to a physical device. To create a logical device, call:

// Provided by VK_VERSION_1_0
VkResult vkCreateDevice(
    VkPhysicalDevice                            physicalDevice,
    const VkDeviceCreateInfo*                   pCreateInfo,
    const VkAllocationCallbacks*                pAllocator,
    VkDevice*                                   pDevice);
  • physicalDevice must be one of the device handles returned from a call to vkEnumeratePhysicalDevices (see Physical Device Enumeration).

  • pCreateInfo is a pointer to a VkDeviceCreateInfo structure containing information about how to create the device.

  • pAllocator controls host memory allocation as described in the Memory Allocation chapter.

  • pDevice is a pointer to a handle in which the created VkDevice is returned.

vkCreateDevice verifies that extensions and features requested in the ppEnabledExtensionNames and pEnabledFeatures members of pCreateInfo, respectively, are supported by the implementation. If any requested extension is not supported, vkCreateDevice must return VK_ERROR_EXTENSION_NOT_PRESENT. If any requested feature is not supported, vkCreateDevice must return VK_ERROR_FEATURE_NOT_PRESENT. Support for extensions can be checked before creating a device by querying vkEnumerateDeviceExtensionProperties. Support for features can similarly be checked by querying vkGetPhysicalDeviceFeatures.

After verifying and enabling the extensions the VkDevice object is created and returned to the application.

Multiple logical devices can be created from the same physical device. Logical device creation may fail due to lack of device-specific resources (in addition to other errors). If that occurs, vkCreateDevice will return VK_ERROR_TOO_MANY_OBJECTS.

Valid Usage
Valid Usage (Implicit)
  • VUID-vkCreateDevice-physicalDevice-parameter
    physicalDevice must be a valid VkPhysicalDevice handle

  • VUID-vkCreateDevice-pCreateInfo-parameter
    pCreateInfo must be a valid pointer to a valid VkDeviceCreateInfo structure

  • VUID-vkCreateDevice-pAllocator-parameter
    If pAllocator is not NULL, pAllocator must be a valid pointer to a valid VkAllocationCallbacks structure

  • VUID-vkCreateDevice-pDevice-parameter
    pDevice must be a valid pointer to a VkDevice handle

Return Codes
Success
  • VK_SUCCESS

Failure
  • VK_ERROR_OUT_OF_HOST_MEMORY

  • VK_ERROR_OUT_OF_DEVICE_MEMORY

  • VK_ERROR_INITIALIZATION_FAILED

  • VK_ERROR_EXTENSION_NOT_PRESENT

  • VK_ERROR_FEATURE_NOT_PRESENT

  • VK_ERROR_TOO_MANY_OBJECTS

  • VK_ERROR_DEVICE_LOST

The VkDeviceCreateInfo structure is defined as:

// Provided by VK_VERSION_1_0
typedef struct VkDeviceCreateInfo {
    VkStructureType                    sType;
    const void*                        pNext;
    VkDeviceCreateFlags                flags;
    uint32_t                           queueCreateInfoCount;
    const VkDeviceQueueCreateInfo*     pQueueCreateInfos;
    uint32_t                           enabledLayerCount;
    const char* const*                 ppEnabledLayerNames;
    uint32_t                           enabledExtensionCount;
    const char* const*                 ppEnabledExtensionNames;
    const VkPhysicalDeviceFeatures*    pEnabledFeatures;
} VkDeviceCreateInfo;
  • sType is a VkStructureType value identifying this structure.

  • pNext is NULL or a pointer to a structure extending this structure.

  • flags is reserved for future use.

  • queueCreateInfoCount is the unsigned integer size of the pQueueCreateInfos array. Refer to the Queue Creation section below for further details.

  • pQueueCreateInfos is a pointer to an array of VkDeviceQueueCreateInfo structures describing the queues that are requested to be created along with the logical device. Refer to the Queue Creation section below for further details.

  • enabledLayerCount is deprecated and ignored.

  • ppEnabledLayerNames is deprecated and ignored. See Device Layer Deprecation.

  • enabledExtensionCount is the number of device extensions to enable.

  • ppEnabledExtensionNames is a pointer to an array of enabledExtensionCount null-terminated UTF-8 strings containing the names of extensions to enable for the created device. See the Extensions section for further details.

  • pEnabledFeatures is NULL or a pointer to a VkPhysicalDeviceFeatures structure containing boolean indicators of all the features to be enabled. Refer to the Features section for further details.

Valid Usage
Valid Usage (Implicit)
// Provided by VK_VERSION_1_0
typedef VkFlags VkDeviceCreateFlags;

VkDeviceCreateFlags is a bitmask type for setting a mask, but is currently reserved for future use.

A logical device can be created that connects to one or more physical devices by adding a VkDeviceGroupDeviceCreateInfo structure to the pNext chain of VkDeviceCreateInfo. The VkDeviceGroupDeviceCreateInfo structure is defined as:

// Provided by VK_VERSION_1_1
typedef struct VkDeviceGroupDeviceCreateInfo {
    VkStructureType            sType;
    const void*                pNext;
    uint32_t                   physicalDeviceCount;
    const VkPhysicalDevice*    pPhysicalDevices;
} VkDeviceGroupDeviceCreateInfo;

or the equivalent

// Provided by VK_KHR_device_group_creation
typedef VkDeviceGroupDeviceCreateInfo VkDeviceGroupDeviceCreateInfoKHR;
  • sType is a VkStructureType value identifying this structure.

  • pNext is NULL or a pointer to a structure extending this structure.

  • physicalDeviceCount is the number of elements in the pPhysicalDevices array.

  • pPhysicalDevices is a pointer to an array of physical device handles belonging to the same device group.

The elements of the pPhysicalDevices array are an ordered list of the physical devices that the logical device represents. These must be a subset of a single device group, and need not be in the same order as they were enumerated. The order of the physical devices in the pPhysicalDevices array determines the device index of each physical device, with element i being assigned a device index of i. Certain commands and structures refer to one or more physical devices by using device indices or device masks formed using device indices.

A logical device created without using VkDeviceGroupDeviceCreateInfo, or with physicalDeviceCount equal to zero, is equivalent to a physicalDeviceCount of one and pPhysicalDevices pointing to the physicalDevice parameter to vkCreateDevice. In particular, the device index of that physical device is zero.

Valid Usage
  • VUID-VkDeviceGroupDeviceCreateInfo-pPhysicalDevices-00375
    Each element of pPhysicalDevices must be unique

  • VUID-VkDeviceGroupDeviceCreateInfo-pPhysicalDevices-00376
    All elements of pPhysicalDevices must be in the same device group as enumerated by vkEnumeratePhysicalDeviceGroups

  • VUID-VkDeviceGroupDeviceCreateInfo-physicalDeviceCount-00377
    If physicalDeviceCount is not 0, the physicalDevice parameter of vkCreateDevice must be an element of pPhysicalDevices

Valid Usage (Implicit)
  • VUID-VkDeviceGroupDeviceCreateInfo-sType-sType
    sType must be VK_STRUCTURE_TYPE_DEVICE_GROUP_DEVICE_CREATE_INFO

  • VUID-VkDeviceGroupDeviceCreateInfo-pPhysicalDevices-parameter
    If physicalDeviceCount is not 0, pPhysicalDevices must be a valid pointer to an array of physicalDeviceCount valid VkPhysicalDevice handles

To specify whether device memory allocation is allowed beyond the size reported by VkPhysicalDeviceMemoryProperties, add a VkDeviceMemoryOverallocationCreateInfoAMD structure to the pNext chain of the VkDeviceCreateInfo structure. If this structure is not specified, it is as if the VK_MEMORY_OVERALLOCATION_BEHAVIOR_DEFAULT_AMD value is used.

// Provided by VK_AMD_memory_overallocation_behavior
typedef struct VkDeviceMemoryOverallocationCreateInfoAMD {
    VkStructureType                      sType;
    const void*                          pNext;
    VkMemoryOverallocationBehaviorAMD    overallocationBehavior;
} VkDeviceMemoryOverallocationCreateInfoAMD;
  • sType is a VkStructureType value identifying this structure.

  • pNext is NULL or a pointer to a structure extending this structure.

  • overallocationBehavior is the desired overallocation behavior.

Valid Usage (Implicit)
  • VUID-VkDeviceMemoryOverallocationCreateInfoAMD-sType-sType
    sType must be VK_STRUCTURE_TYPE_DEVICE_MEMORY_OVERALLOCATION_CREATE_INFO_AMD

  • VUID-VkDeviceMemoryOverallocationCreateInfoAMD-overallocationBehavior-parameter
    overallocationBehavior must be a valid VkMemoryOverallocationBehaviorAMD value

Possible values for VkDeviceMemoryOverallocationCreateInfoAMD::overallocationBehavior include:

// Provided by VK_AMD_memory_overallocation_behavior
typedef enum VkMemoryOverallocationBehaviorAMD {
    VK_MEMORY_OVERALLOCATION_BEHAVIOR_DEFAULT_AMD = 0,
    VK_MEMORY_OVERALLOCATION_BEHAVIOR_ALLOWED_AMD = 1,
    VK_MEMORY_OVERALLOCATION_BEHAVIOR_DISALLOWED_AMD = 2,
} VkMemoryOverallocationBehaviorAMD;
  • VK_MEMORY_OVERALLOCATION_BEHAVIOR_DEFAULT_AMD lets the implementation decide if overallocation is allowed.

  • VK_MEMORY_OVERALLOCATION_BEHAVIOR_ALLOWED_AMD specifies overallocation is allowed if platform permits.

  • VK_MEMORY_OVERALLOCATION_BEHAVIOR_DISALLOWED_AMD specifies the application is not allowed to allocate device memory beyond the heap sizes reported by VkPhysicalDeviceMemoryProperties. Allocations that are not explicitly made by the application within the scope of the Vulkan instance are not accounted for.

When using the Nsight Aftermath SDK, to configure how device crash dumps are created, add a VkDeviceDiagnosticsConfigCreateInfoNV structure to the pNext chain of the VkDeviceCreateInfo structure.

// Provided by VK_NV_device_diagnostics_config
typedef struct VkDeviceDiagnosticsConfigCreateInfoNV {
    VkStructureType                     sType;
    const void*                         pNext;
    VkDeviceDiagnosticsConfigFlagsNV    flags;
} VkDeviceDiagnosticsConfigCreateInfoNV;
  • sType is a VkStructureType value identifying this structure.

  • pNext is NULL or a pointer to a structure extending this structure.

  • flags is a bitmask of VkDeviceDiagnosticsConfigFlagBitsNV specifying additional parameters for configuring diagnostic tools.

Valid Usage (Implicit)
  • VUID-VkDeviceDiagnosticsConfigCreateInfoNV-sType-sType
    sType must be VK_STRUCTURE_TYPE_DEVICE_DIAGNOSTICS_CONFIG_CREATE_INFO_NV

  • VUID-VkDeviceDiagnosticsConfigCreateInfoNV-flags-parameter
    flags must be a valid combination of VkDeviceDiagnosticsConfigFlagBitsNV values

Bits which can be set in VkDeviceDiagnosticsConfigCreateInfoNV::flags include:

// Provided by VK_NV_device_diagnostics_config
typedef enum VkDeviceDiagnosticsConfigFlagBitsNV {
    VK_DEVICE_DIAGNOSTICS_CONFIG_ENABLE_SHADER_DEBUG_INFO_BIT_NV = 0x00000001,
    VK_DEVICE_DIAGNOSTICS_CONFIG_ENABLE_RESOURCE_TRACKING_BIT_NV = 0x00000002,
    VK_DEVICE_DIAGNOSTICS_CONFIG_ENABLE_AUTOMATIC_CHECKPOINTS_BIT_NV = 0x00000004,
    VK_DEVICE_DIAGNOSTICS_CONFIG_ENABLE_SHADER_ERROR_REPORTING_BIT_NV = 0x00000008,
} VkDeviceDiagnosticsConfigFlagBitsNV;
  • VK_DEVICE_DIAGNOSTICS_CONFIG_ENABLE_SHADER_DEBUG_INFO_BIT_NV enables the generation of debug information for shaders.

  • VK_DEVICE_DIAGNOSTICS_CONFIG_ENABLE_RESOURCE_TRACKING_BIT_NV enables driver side tracking of resources (images, buffers, etc.) used to augment the device fault information.

  • VK_DEVICE_DIAGNOSTICS_CONFIG_ENABLE_AUTOMATIC_CHECKPOINTS_BIT_NV enables automatic insertion of diagnostic checkpoints for draw calls, dispatches, trace rays, and copies. The CPU call stack at the time of the command will be associated as the marker data for the automatically inserted checkpoints.

  • VK_DEVICE_DIAGNOSTICS_CONFIG_ENABLE_SHADER_ERROR_REPORTING_BIT_NV enables shader error reporting.

// Provided by VK_NV_device_diagnostics_config
typedef VkFlags VkDeviceDiagnosticsConfigFlagsNV;

VkDeviceDiagnosticsConfigFlagsNV is a bitmask type for setting a mask of zero or more VkDeviceDiagnosticsConfigFlagBitsNV.

To register callbacks for underlying device memory events of type VkDeviceMemoryReportEventTypeEXT, add one or multiple VkDeviceDeviceMemoryReportCreateInfoEXT structures to the pNext chain of the VkDeviceCreateInfo structure.

// Provided by VK_EXT_device_memory_report
typedef struct VkDeviceDeviceMemoryReportCreateInfoEXT {
    VkStructureType                        sType;
    const void*                            pNext;
    VkDeviceMemoryReportFlagsEXT           flags;
    PFN_vkDeviceMemoryReportCallbackEXT    pfnUserCallback;
    void*                                  pUserData;
} VkDeviceDeviceMemoryReportCreateInfoEXT;
  • sType is a VkStructureType value identifying this structure.

  • pNext is NULL or a pointer to a structure extending this structure.

  • flags is 0 and reserved for future use.

  • pfnUserCallback is the application callback function to call.

  • pUserData is user data to be passed to the callback.

The callback may be called from multiple threads simultaneously.

The callback must be called only once by the implementation when a VkDeviceMemoryReportEventTypeEXT event occurs.

Note

The callback could be called from a background thread other than the thread calling the Vulkan commands.

Valid Usage (Implicit)
  • VUID-VkDeviceDeviceMemoryReportCreateInfoEXT-sType-sType
    sType must be VK_STRUCTURE_TYPE_DEVICE_DEVICE_MEMORY_REPORT_CREATE_INFO_EXT

  • VUID-VkDeviceDeviceMemoryReportCreateInfoEXT-flags-zerobitmask
    flags must be 0

  • VUID-VkDeviceDeviceMemoryReportCreateInfoEXT-pfnUserCallback-parameter
    pfnUserCallback must be a valid PFN_vkDeviceMemoryReportCallbackEXT value

  • VUID-VkDeviceDeviceMemoryReportCreateInfoEXT-pUserData-parameter
    pUserData must be a pointer value

The prototype for the VkDeviceDeviceMemoryReportCreateInfoEXT::pfnUserCallback function implemented by the application is:

// Provided by VK_EXT_device_memory_report
typedef void (VKAPI_PTR *PFN_vkDeviceMemoryReportCallbackEXT)(
    const VkDeviceMemoryReportCallbackDataEXT*  pCallbackData,
    void*                                       pUserData);

The callback must not make calls to any Vulkan commands.

The definition of VkDeviceMemoryReportCallbackDataEXT is:

// Provided by VK_EXT_device_memory_report
typedef struct VkDeviceMemoryReportCallbackDataEXT {
    VkStructureType                     sType;
    void*                               pNext;
    VkDeviceMemoryReportFlagsEXT        flags;
    VkDeviceMemoryReportEventTypeEXT    type;
    uint64_t                            memoryObjectId;
    VkDeviceSize                        size;
    VkObjectType                        objectType;
    uint64_t                            objectHandle;
    uint32_t                            heapIndex;
} VkDeviceMemoryReportCallbackDataEXT;
  • sType is a VkStructureType value identifying this structure.

  • pNext is NULL or a pointer to a structure extending this structure.

  • flags is 0 and reserved for future use.

  • type is a VkDeviceMemoryReportEventTypeEXT type specifying the type of event reported in this VkDeviceMemoryReportCallbackDataEXT structure.

  • memoryObjectId is the unique id for the underlying memory object as described below.

  • size is the size of the memory object in bytes. If type is VK_DEVICE_MEMORY_REPORT_EVENT_TYPE_ALLOCATE_EXT, VK_DEVICE_MEMORY_REPORT_EVENT_TYPE_IMPORT_EXT or VK_DEVICE_MEMORY_REPORT_EVENT_TYPE_ALLOCATION_FAILED_EXT, size is a valid VkDeviceSize value. Otherwise, size is undefined.

  • objectType is a VkObjectType value specifying the type of the object associated with this device memory report event. If type is VK_DEVICE_MEMORY_REPORT_EVENT_TYPE_ALLOCATE_EXT, VK_DEVICE_MEMORY_REPORT_EVENT_TYPE_FREE_EXT, VK_DEVICE_MEMORY_REPORT_EVENT_TYPE_IMPORT_EXT, VK_DEVICE_MEMORY_REPORT_EVENT_TYPE_UNIMPORT_EXT or VK_DEVICE_MEMORY_REPORT_EVENT_TYPE_ALLOCATION_FAILED_EXT, objectType is a valid VkObjectType enum. Otherwise, objectType is undefined.

  • objectHandle is the object this device memory report event is attributed to. If type is VK_DEVICE_MEMORY_REPORT_EVENT_TYPE_ALLOCATE_EXT, VK_DEVICE_MEMORY_REPORT_EVENT_TYPE_FREE_EXT, VK_DEVICE_MEMORY_REPORT_EVENT_TYPE_IMPORT_EXT or VK_DEVICE_MEMORY_REPORT_EVENT_TYPE_UNIMPORT_EXT, objectHandle is a valid Vulkan handle of the type associated with objectType as defined in the VkObjectType and Vulkan Handle Relationship table. Otherwise, objectHandle is undefined.

  • heapIndex describes which memory heap this device memory allocation is made from. If type is VK_DEVICE_MEMORY_REPORT_EVENT_TYPE_ALLOCATE_EXT or VK_DEVICE_MEMORY_REPORT_EVENT_TYPE_ALLOCATION_FAILED_EXT, heapIndex corresponds to one of the valid heaps from the VkPhysicalDeviceMemoryProperties structure. Otherwise, heapIndex is undefined.

memoryObjectId is used to avoid double-counting on the same memory object.

If an internally-allocated device memory object or a VkDeviceMemory cannot be exported, memoryObjectId must be unique in the VkDevice.

If an internally-allocated device memory object or a VkDeviceMemory supports being exported, memoryObjectId must be unique system wide.

If an internal device memory object or a VkDeviceMemory is backed by an imported external memory object, memoryObjectId must be unique system wide.

Implementor’s Note

If the heap backing an internally-allocated device memory cannot be used to back VkDeviceMemory, implementations can advertise that heap with no types.

Note

This structure should only be considered valid during the lifetime of the triggered callback.

For VK_DEVICE_MEMORY_REPORT_EVENT_TYPE_ALLOCATE_EXT and VK_DEVICE_MEMORY_REPORT_EVENT_TYPE_IMPORT_EXT events, objectHandle usually will not yet exist when the application or tool receives the callback. objectHandle will only exist when the create or allocate call that triggered the event returns, and if the allocation or import ends up failing objectHandle will not ever exist.

Valid Usage (Implicit)
  • VUID-VkDeviceMemoryReportCallbackDataEXT-sType-sType
    sType must be VK_STRUCTURE_TYPE_DEVICE_MEMORY_REPORT_CALLBACK_DATA_EXT

  • VUID-VkDeviceMemoryReportCallbackDataEXT-pNext-pNext
    pNext must be NULL

// Provided by VK_EXT_device_memory_report
typedef VkFlags VkDeviceMemoryReportFlagsEXT;

VkDeviceMemoryReportFlagsEXT is a bitmask type for setting a mask, but is currently reserved for future use.

Possible values of VkDeviceMemoryReportCallbackDataEXT::type, specifying event types which cause the device driver to call the callback, are:

// Provided by VK_EXT_device_memory_report
typedef enum VkDeviceMemoryReportEventTypeEXT {
    VK_DEVICE_MEMORY_REPORT_EVENT_TYPE_ALLOCATE_EXT = 0,
    VK_DEVICE_MEMORY_REPORT_EVENT_TYPE_FREE_EXT = 1,
    VK_DEVICE_MEMORY_REPORT_EVENT_TYPE_IMPORT_EXT = 2,
    VK_DEVICE_MEMORY_REPORT_EVENT_TYPE_UNIMPORT_EXT = 3,
    VK_DEVICE_MEMORY_REPORT_EVENT_TYPE_ALLOCATION_FAILED_EXT = 4,
} VkDeviceMemoryReportEventTypeEXT;
  • VK_DEVICE_MEMORY_REPORT_EVENT_TYPE_ALLOCATE_EXT specifies this event corresponds to the allocation of an internal device memory object or a VkDeviceMemory.

  • VK_DEVICE_MEMORY_REPORT_EVENT_TYPE_FREE_EXT specifies this event corresponds to the deallocation of an internally-allocated device memory object or a VkDeviceMemory.

  • VK_DEVICE_MEMORY_REPORT_EVENT_TYPE_IMPORT_EXT specifies this event corresponds to the import of an external memory object.

  • VK_DEVICE_MEMORY_REPORT_EVENT_TYPE_UNIMPORT_EXT specifies this event is the release of an imported external memory object.

  • VK_DEVICE_MEMORY_REPORT_EVENT_TYPE_ALLOCATION_FAILED_EXT specifies this event corresponds to the failed allocation of an internal device memory object or a VkDeviceMemory.

To reserve private data storage slots, add a VkDevicePrivateDataCreateInfo structure to the pNext chain of the VkDeviceCreateInfo structure. Reserving slots in this manner is not strictly necessary, but doing so may improve performance.

// Provided by VK_VERSION_1_3
typedef struct VkDevicePrivateDataCreateInfo {
    VkStructureType    sType;
    const void*        pNext;
    uint32_t           privateDataSlotRequestCount;
} VkDevicePrivateDataCreateInfo;

or the equivalent

// Provided by VK_EXT_private_data
typedef VkDevicePrivateDataCreateInfo VkDevicePrivateDataCreateInfoEXT;
  • sType is a VkStructureType value identifying this structure.

  • pNext is NULL or a pointer to a structure extending this structure.

  • privateDataSlotRequestCount is the amount of slots to reserve.

Valid Usage (Implicit)
  • VUID-VkDevicePrivateDataCreateInfo-sType-sType
    sType must be VK_STRUCTURE_TYPE_DEVICE_PRIVATE_DATA_CREATE_INFO

5.2.2. Device Use

The following is a high-level list of VkDevice uses along with references on where to find more information:

5.2.3. Lost Device

A logical device may become lost for a number of implementation-specific reasons, indicating that pending and future command execution may fail and cause resources and backing memory to become undefined.

Note

Typical reasons for device loss will include things like execution timing out (to prevent denial of service), power management events, platform resource management, implementation errors.

Applications not adhering to valid usage may also result in device loss being reported, however this is not guaranteed. Even if device loss is reported, the system may be in an unrecoverable state, and further usage of the API is still considered invalid.

When this happens, certain commands will return VK_ERROR_DEVICE_LOST. After any such event, the logical device is considered lost. It is not possible to reset the logical device to a non-lost state, however the lost state is specific to a logical device (VkDevice), and the corresponding physical device (VkPhysicalDevice) may be otherwise unaffected.

In some cases, the physical device may also be lost, and attempting to create a new logical device will fail, returning VK_ERROR_DEVICE_LOST. This is usually indicative of a problem with the underlying implementation, or its connection to the host. If the physical device has not been lost, and a new logical device is successfully created from that physical device, it must be in the non-lost state.

Note

Whilst logical device loss may be recoverable, in the case of physical device loss, it is unlikely that an application will be able to recover unless additional, unaffected physical devices exist on the system. The error is largely informational and intended only to inform the user that a platform issue has occurred, and should be investigated further. For example, underlying hardware may have developed a fault or become physically disconnected from the rest of the system. In many cases, physical device loss may cause other more serious issues such as the operating system crashing; in which case it may not be reported via the Vulkan API.

When a device is lost, its child objects are not implicitly destroyed and their handles are still valid. Those objects must still be destroyed before their parents or the device can be destroyed (see the Object Lifetime section). The host address space corresponding to device memory mapped using vkMapMemory is still valid, and host memory accesses to these mapped regions are still valid, but the contents are undefined. It is still legal to call any API command on the device and child objects.

Once a device is lost, command execution may fail, and certain commands that return a VkResult may return VK_ERROR_DEVICE_LOST. These commands can be identified by the inclusion of VK_ERROR_DEVICE_LOST in the Return Codes section for each command. Commands that do not allow runtime errors must still operate correctly for valid usage and, if applicable, return valid data.

Commands that wait indefinitely for device execution (namely vkDeviceWaitIdle, vkQueueWaitIdle, vkWaitForFences or vkAcquireNextImageKHR with a maximum timeout, and vkGetQueryPoolResults with the VK_QUERY_RESULT_WAIT_BIT bit set in flags) must return in finite time even in the case of a lost device, and return either VK_SUCCESS or VK_ERROR_DEVICE_LOST. For any command that may return VK_ERROR_DEVICE_LOST, for the purpose of determining whether a command buffer is in the pending state, or whether resources are considered in-use by the device, a return value of VK_ERROR_DEVICE_LOST is equivalent to VK_SUCCESS.

The content of any external memory objects that have been exported from or imported to a lost device become undefined. Objects on other logical devices or in other APIs which are associated with the same underlying memory resource as the external memory objects on the lost device are unaffected other than their content becoming undefined. The layout of subresources of images on other logical devices that are bound to VkDeviceMemory objects associated with the same underlying memory resources as external memory objects on the lost device becomes VK_IMAGE_LAYOUT_UNDEFINED.

The state of VkSemaphore objects on other logical devices created by importing a semaphore payload with temporary permanence which was exported from the lost device is undefined. The state of VkSemaphore objects on other logical devices that permanently share a semaphore payload with a VkSemaphore object on the lost device is undefined, and remains undefined following any subsequent signal operations. Implementations must ensure pending and subsequently submitted wait operations on such semaphores behave as defined in Semaphore State Requirements For Wait Operations for external semaphores not in a valid state for a wait operation.

editing-note

TODO (piman) - I do not think we are very clear about what “in-use by the device” means.

5.2.4. Device Destruction

To destroy a device, call:

// Provided by VK_VERSION_1_0
void vkDestroyDevice(
    VkDevice                                    device,
    const VkAllocationCallbacks*                pAllocator);
  • device is the logical device to destroy.

  • pAllocator controls host memory allocation as described in the Memory Allocation chapter.

To ensure that no work is active on the device, vkDeviceWaitIdle can be used to gate the destruction of the device. Prior to destroying a device, an application is responsible for destroying/freeing any Vulkan objects that were created using that device as the first parameter of the corresponding vkCreate* or vkAllocate* command.

Note

The lifetime of each of these objects is bound by the lifetime of the VkDevice object. Therefore, to avoid resource leaks, it is critical that an application explicitly free all of these resources prior to calling vkDestroyDevice.

Valid Usage
  • VUID-vkDestroyDevice-device-00378
    All child objects created on device must have been destroyed prior to destroying device

  • VUID-vkDestroyDevice-device-00379
    If VkAllocationCallbacks were provided when device was created, a compatible set of callbacks must be provided here

  • VUID-vkDestroyDevice-device-00380
    If no VkAllocationCallbacks were provided when device was created, pAllocator must be NULL

Valid Usage (Implicit)
  • VUID-vkDestroyDevice-device-parameter
    If device is not NULL, device must be a valid VkDevice handle

  • VUID-vkDestroyDevice-pAllocator-parameter
    If pAllocator is not NULL, pAllocator must be a valid pointer to a valid VkAllocationCallbacks structure

Host Synchronization
  • Host access to device must be externally synchronized

  • Host access to all VkQueue objects created from device must be externally synchronized

5.3. Queues

5.3.1. Queue Family Properties

As discussed in the Physical Device Enumeration section above, the vkGetPhysicalDeviceQueueFamilyProperties command is used to retrieve details about the queue families and queues supported by a device.

Each index in the pQueueFamilyProperties array returned by vkGetPhysicalDeviceQueueFamilyProperties describes a unique queue family on that physical device. These indices are used when creating queues, and they correspond directly with the queueFamilyIndex that is passed to the vkCreateDevice command via the VkDeviceQueueCreateInfo structure as described in the Queue Creation section below.

Grouping of queue families within a physical device is implementation-dependent.

Note

The general expectation is that a physical device groups all queues of matching capabilities into a single family. However, while implementations should do this, it is possible that a physical device may return two separate queue families with the same capabilities.

Once an application has identified a physical device with the queue(s) that it desires to use, it will create those queues in conjunction with a logical device. This is described in the following section.

5.3.2. Queue Creation

Creating a logical device also creates the queues associated with that device. The queues to create are described by a set of VkDeviceQueueCreateInfo structures that are passed to vkCreateDevice in pQueueCreateInfos.

Queues are represented by VkQueue handles:

// Provided by VK_VERSION_1_0
VK_DEFINE_HANDLE(VkQueue)

The VkDeviceQueueCreateInfo structure is defined as:

// Provided by VK_VERSION_1_0
typedef struct VkDeviceQueueCreateInfo {
    VkStructureType             sType;
    const void*                 pNext;
    VkDeviceQueueCreateFlags    flags;
    uint32_t                    queueFamilyIndex;
    uint32_t                    queueCount;
    const float*                pQueuePriorities;
} VkDeviceQueueCreateInfo;
  • sType is a VkStructureType value identifying this structure.

  • pNext is NULL or a pointer to a structure extending this structure.

  • flags is a bitmask indicating behavior of the queues.

  • queueFamilyIndex is an unsigned integer indicating the index of the queue family in which to create the queues on this device. This index corresponds to the index of an element of the pQueueFamilyProperties array that was returned by vkGetPhysicalDeviceQueueFamilyProperties.

  • queueCount is an unsigned integer specifying the number of queues to create in the queue family indicated by queueFamilyIndex, and with the behavior specified by flags.

  • pQueuePriorities is a pointer to an array of queueCount normalized floating point values, specifying priorities of work that will be submitted to each created queue. See Queue Priority for more information.

Valid Usage
  • VUID-VkDeviceQueueCreateInfo-queueFamilyIndex-00381
    queueFamilyIndex must be less than pQueueFamilyPropertyCount returned by vkGetPhysicalDeviceQueueFamilyProperties

  • VUID-VkDeviceQueueCreateInfo-queueCount-00382
    queueCount must be less than or equal to the queueCount member of the VkQueueFamilyProperties structure, as returned by vkGetPhysicalDeviceQueueFamilyProperties in the pQueueFamilyProperties[queueFamilyIndex]

  • VUID-VkDeviceQueueCreateInfo-pQueuePriorities-00383
    Each element of pQueuePriorities must be between 0.0 and 1.0 inclusive

  • VUID-VkDeviceQueueCreateInfo-flags-02861
    If the protectedMemory feature is not enabled, the VK_DEVICE_QUEUE_CREATE_PROTECTED_BIT bit of flags must not be set

  • VUID-VkDeviceQueueCreateInfo-flags-06449
    If flags includes VK_DEVICE_QUEUE_CREATE_PROTECTED_BIT, queueFamilyIndex must be the index of a queue family that includes the VK_QUEUE_PROTECTED_BIT capability

Valid Usage (Implicit)
  • VUID-VkDeviceQueueCreateInfo-sType-sType
    sType must be VK_STRUCTURE_TYPE_DEVICE_QUEUE_CREATE_INFO

  • VUID-VkDeviceQueueCreateInfo-pNext-pNext
    pNext must be NULL or a pointer to a valid instance of VkDeviceQueueGlobalPriorityCreateInfoKHR

  • VUID-VkDeviceQueueCreateInfo-sType-unique
    The sType value of each struct in the pNext chain must be unique

  • VUID-VkDeviceQueueCreateInfo-flags-parameter
    flags must be a valid combination of VkDeviceQueueCreateFlagBits values

  • VUID-VkDeviceQueueCreateInfo-pQueuePriorities-parameter
    pQueuePriorities must be a valid pointer to an array of queueCount float values

  • VUID-VkDeviceQueueCreateInfo-queueCount-arraylength
    queueCount must be greater than 0

Bits which can be set in VkDeviceQueueCreateInfo::flags, specifying usage behavior of a queue, are:

// Provided by VK_VERSION_1_1
typedef enum VkDeviceQueueCreateFlagBits {
  // Provided by VK_VERSION_1_1
    VK_DEVICE_QUEUE_CREATE_PROTECTED_BIT = 0x00000001,
} VkDeviceQueueCreateFlagBits;
  • VK_DEVICE_QUEUE_CREATE_PROTECTED_BIT specifies that the device queue is a protected-capable queue.

// Provided by VK_VERSION_1_0
typedef VkFlags VkDeviceQueueCreateFlags;

VkDeviceQueueCreateFlags is a bitmask type for setting a mask of zero or more VkDeviceQueueCreateFlagBits.

Queues can be created with a system-wide priority by adding a VkDeviceQueueGlobalPriorityCreateInfoKHR structure to the pNext chain of VkDeviceQueueCreateInfo.

The VkDeviceQueueGlobalPriorityCreateInfoKHR structure is defined as:

// Provided by VK_KHR_global_priority
typedef struct VkDeviceQueueGlobalPriorityCreateInfoKHR {
    VkStructureType             sType;
    const void*                 pNext;
    VkQueueGlobalPriorityKHR    globalPriority;
} VkDeviceQueueGlobalPriorityCreateInfoKHR;

or the equivalent

// Provided by VK_EXT_global_priority
typedef VkDeviceQueueGlobalPriorityCreateInfoKHR VkDeviceQueueGlobalPriorityCreateInfoEXT;
  • sType is a VkStructureType value identifying this structure.

  • pNext is NULL or a pointer to a structure extending this structure.

  • globalPriority is the system-wide priority associated to these queues as specified by VkQueueGlobalPriorityEXT

Queues created without specifying VkDeviceQueueGlobalPriorityCreateInfoKHR will default to VK_QUEUE_GLOBAL_PRIORITY_MEDIUM_KHR.

Valid Usage (Implicit)
  • VUID-VkDeviceQueueGlobalPriorityCreateInfoKHR-sType-sType
    sType must be VK_STRUCTURE_TYPE_DEVICE_QUEUE_GLOBAL_PRIORITY_CREATE_INFO_KHR

  • VUID-VkDeviceQueueGlobalPriorityCreateInfoKHR-globalPriority-parameter
    globalPriority must be a valid VkQueueGlobalPriorityKHR value

Possible values of VkDeviceQueueGlobalPriorityCreateInfoKHR::globalPriority, specifying a system-wide priority level are:

// Provided by VK_KHR_global_priority
typedef enum VkQueueGlobalPriorityKHR {
    VK_QUEUE_GLOBAL_PRIORITY_LOW_KHR = 128,
    VK_QUEUE_GLOBAL_PRIORITY_MEDIUM_KHR = 256,
    VK_QUEUE_GLOBAL_PRIORITY_HIGH_KHR = 512,
    VK_QUEUE_GLOBAL_PRIORITY_REALTIME_KHR = 1024,
    VK_QUEUE_GLOBAL_PRIORITY_LOW_EXT = VK_QUEUE_GLOBAL_PRIORITY_LOW_KHR,
    VK_QUEUE_GLOBAL_PRIORITY_MEDIUM_EXT = VK_QUEUE_GLOBAL_PRIORITY_MEDIUM_KHR,
    VK_QUEUE_GLOBAL_PRIORITY_HIGH_EXT = VK_QUEUE_GLOBAL_PRIORITY_HIGH_KHR,
    VK_QUEUE_GLOBAL_PRIORITY_REALTIME_EXT = VK_QUEUE_GLOBAL_PRIORITY_REALTIME_KHR,
} VkQueueGlobalPriorityKHR;

or the equivalent

// Provided by VK_EXT_global_priority
typedef VkQueueGlobalPriorityKHR VkQueueGlobalPriorityEXT;

Priority values are sorted in ascending order. A comparison operation on the enum values can be used to determine the priority order.

  • VK_QUEUE_GLOBAL_PRIORITY_LOW_KHR is below the system default. Useful for non-interactive tasks.

  • VK_QUEUE_GLOBAL_PRIORITY_MEDIUM_KHR is the system default priority.

  • VK_QUEUE_GLOBAL_PRIORITY_HIGH_KHR is above the system default.

  • VK_QUEUE_GLOBAL_PRIORITY_REALTIME_KHR is the highest priority. Useful for critical tasks.

Queues with higher system priority may be allotted more processing time than queues with lower priority. An implementation may allow a higher-priority queue to starve a lower-priority queue until the higher-priority queue has no further commands to execute.

Priorities imply no ordering or scheduling constraints.

No specific guarantees are made about higher priority queues receiving more processing time or better quality of service than lower priority queues.

The global priority level of a queue takes precedence over the per-process queue priority (VkDeviceQueueCreateInfo::pQueuePriorities).

Abuse of this feature may result in starving the rest of the system of implementation resources. Therefore, the driver implementation may deny requests to acquire a priority above the default priority (VK_QUEUE_GLOBAL_PRIORITY_MEDIUM_KHR) if the caller does not have sufficient privileges. In this scenario VK_ERROR_NOT_PERMITTED_KHR is returned.

The driver implementation may fail the queue allocation request if resources required to complete the operation have been exhausted (either by the same process or a different process). In this scenario VK_ERROR_INITIALIZATION_FAILED is returned.

If the globalPriorityQuery feature is enabled and the requested global priority is not reported via VkQueueFamilyGlobalPriorityPropertiesKHR, the driver implementation must fail the queue creation. In this scenario, VK_ERROR_INITIALIZATION_FAILED is returned.

To retrieve a handle to a VkQueue object, call:

// Provided by VK_VERSION_1_0
void vkGetDeviceQueue(
    VkDevice                                    device,
    uint32_t                                    queueFamilyIndex,
    uint32_t                                    queueIndex,
    VkQueue*                                    pQueue);
  • device is the logical device that owns the queue.

  • queueFamilyIndex is the index of the queue family to which the queue belongs.

  • queueIndex is the index within this queue family of the queue to retrieve.

  • pQueue is a pointer to a VkQueue object that will be filled with the handle for the requested queue.

vkGetDeviceQueue must only be used to get queues that were created with the flags parameter of VkDeviceQueueCreateInfo set to zero. To get queues that were created with a non-zero flags parameter use vkGetDeviceQueue2.

Valid Usage
  • VUID-vkGetDeviceQueue-queueFamilyIndex-00384
    queueFamilyIndex must be one of the queue family indices specified when device was created, via the VkDeviceQueueCreateInfo structure

  • VUID-vkGetDeviceQueue-queueIndex-00385
    queueIndex must be less than the value of VkDeviceQueueCreateInfo::queueCount for the queue family indicated by queueFamilyIndex when device was created

  • VUID-vkGetDeviceQueue-flags-01841
    VkDeviceQueueCreateInfo::flags must have been set to zero when device was created

Valid Usage (Implicit)
  • VUID-vkGetDeviceQueue-device-parameter
    device must be a valid VkDevice handle

  • VUID-vkGetDeviceQueue-pQueue-parameter
    pQueue must be a valid pointer to a VkQueue handle

To retrieve a handle to a VkQueue object with specific VkDeviceQueueCreateFlags creation flags, call:

// Provided by VK_VERSION_1_1
void vkGetDeviceQueue2(
    VkDevice                                    device,
    const VkDeviceQueueInfo2*                   pQueueInfo,
    VkQueue*                                    pQueue);
  • device is the logical device that owns the queue.

  • pQueueInfo is a pointer to a VkDeviceQueueInfo2 structure, describing parameters of the device queue to be retrieved.

  • pQueue is a pointer to a VkQueue object that will be filled with the handle for the requested queue.

Valid Usage (Implicit)
  • VUID-vkGetDeviceQueue2-device-parameter
    device must be a valid VkDevice handle

  • VUID-vkGetDeviceQueue2-pQueueInfo-parameter
    pQueueInfo must be a valid pointer to a valid VkDeviceQueueInfo2 structure

  • VUID-vkGetDeviceQueue2-pQueue-parameter
    pQueue must be a valid pointer to a VkQueue handle

The VkDeviceQueueInfo2 structure is defined as:

// Provided by VK_VERSION_1_1
typedef struct VkDeviceQueueInfo2 {
    VkStructureType             sType;
    const void*                 pNext;
    VkDeviceQueueCreateFlags    flags;
    uint32_t                    queueFamilyIndex;
    uint32_t                    queueIndex;
} VkDeviceQueueInfo2;
  • sType is a VkStructureType value identifying this structure.

  • pNext is NULL or a pointer to a structure extending this structure. The pNext chain of VkDeviceQueueInfo2 can be used to provide additional device queue parameters to vkGetDeviceQueue2.

  • flags is a VkDeviceQueueCreateFlags value indicating the flags used to create the device queue.

  • queueFamilyIndex is the index of the queue family to which the queue belongs.

  • queueIndex is the index of the queue to retrieve from within the set of queues that share both the queue family and flags specified.

The queue returned by vkGetDeviceQueue2 must have the same flags value from this structure as that used at device creation time in a VkDeviceQueueCreateInfo structure.

Note

Normally, if you create both protected-capable and non-protected-capable queues with the same family, they are treated as separate lists of queues and queueIndex is relative to the start of the list of queues specified by both queueFamilyIndex and flags. However, for historical reasons, some implementations may exhibit different behavior. These divergent implementations instead concatenate the lists of queues and treat queueIndex as relative to the start of the first list of queues with the given queueFamilyIndex. This only matters in cases where an application has created both protected-capable and non-protected-capable queues from the same queue family.

For such divergent implementations, the maximum value of queueIndex is equal to the sum of VkDeviceQueueCreateInfo::queueCount minus one, for all VkDeviceQueueCreateInfo structures that share a common queueFamilyIndex.

Such implementations will return NULL for either the protected or unprotected queues when calling vkGetDeviceQueue2 with queueIndex in the range zero to VkDeviceQueueCreateInfo::queueCount minus one. In cases where these implementations returned NULL, the corresponding queues are instead located in the extended range described in the preceding two paragraphs.

This behaviour will not be observed on any driver that has passed Vulkan conformance test suite version 1.3.3.0, or any subsequent version. This information can be found by querying VkPhysicalDeviceDriverProperties::conformanceVersion.

Valid Usage
  • VUID-VkDeviceQueueInfo2-queueFamilyIndex-01842
    queueFamilyIndex must be one of the queue family indices specified when device was created, via the VkDeviceQueueCreateInfo structure

  • VUID-VkDeviceQueueInfo2-flags-06225
    flags must be equal to VkDeviceQueueCreateInfo::flags for a VkDeviceQueueCreateInfo structure for the queue family indicated by queueFamilyIndex when device was created

  • VUID-VkDeviceQueueInfo2-queueIndex-01843
    queueIndex must be less than VkDeviceQueueCreateInfo::queueCount for the corresponding queue family and flags indicated by queueFamilyIndex and flags when device was created

Valid Usage (Implicit)
  • VUID-VkDeviceQueueInfo2-sType-sType
    sType must be VK_STRUCTURE_TYPE_DEVICE_QUEUE_INFO_2

  • VUID-VkDeviceQueueInfo2-pNext-pNext
    pNext must be NULL

  • VUID-VkDeviceQueueInfo2-flags-parameter
    flags must be a valid combination of VkDeviceQueueCreateFlagBits values

5.3.3. Queue Family Index

The queue family index is used in multiple places in Vulkan in order to tie operations to a specific family of queues.

When retrieving a handle to the queue via vkGetDeviceQueue, the queue family index is used to select which queue family to retrieve the VkQueue handle from as described in the previous section.

When creating a VkCommandPool object (see Command Pools), a queue family index is specified in the VkCommandPoolCreateInfo structure. Command buffers from this pool can only be submitted on queues corresponding to this queue family.

When creating VkImage (see Images) and VkBuffer (see Buffers) resources, a set of queue families is included in the VkImageCreateInfo and VkBufferCreateInfo structures to specify the queue families that can access the resource.

When inserting a VkBufferMemoryBarrier or VkImageMemoryBarrier (see Pipeline Barriers), a source and destination queue family index is specified to allow the ownership of a buffer or image to be transferred from one queue family to another. See the Resource Sharing section for details.

5.3.4. Queue Priority

Each queue is assigned a priority, as set in the VkDeviceQueueCreateInfo structures when creating the device. The priority of each queue is a normalized floating point value between 0.0 and 1.0, which is then translated to a discrete priority level by the implementation. Higher values indicate a higher priority, with 0.0 being the lowest priority and 1.0 being the highest.

Within the same device, queues with higher priority may be allotted more processing time than queues with lower priority. The implementation makes no guarantees with regards to ordering or scheduling among queues with the same priority, other than the constraints defined by any explicit synchronization primitives. The implementation makes no guarantees with regards to queues across different devices.

An implementation may allow a higher-priority queue to starve a lower-priority queue on the same VkDevice until the higher-priority queue has no further commands to execute. The relationship of queue priorities must not cause queues on one VkDevice to starve queues on another VkDevice.

No specific guarantees are made about higher priority queues receiving more processing time or better quality of service than lower priority queues.

5.3.5. Queue Submission

Work is submitted to a queue via queue submission commands such as vkQueueSubmit2 or vkQueueSubmit. Queue submission commands define a set of queue operations to be executed by the underlying physical device, including synchronization with semaphores and fences.

Submission commands take as parameters a target queue, zero or more batches of work, and an optional fence to signal upon completion. Each batch consists of three distinct parts:

  1. Zero or more semaphores to wait on before execution of the rest of the batch.

  2. Zero or more work items to execute.

    • If present, these describe a queue operation matching the work described.

  3. Zero or more semaphores to signal upon completion of the work items.

If a fence is present in a queue submission, it describes a fence signal operation.

All work described by a queue submission command must be submitted to the queue before the command returns.

Sparse Memory Binding

In Vulkan it is possible to sparsely bind memory to buffers and images as described in the Sparse Resource chapter. Sparse memory binding is a queue operation. A queue whose flags include the VK_QUEUE_SPARSE_BINDING_BIT must be able to support the mapping of a virtual address to a physical address on the device. This causes an update to the page table mappings on the device. This update must be synchronized on a queue to avoid corrupting page table mappings during execution of graphics commands. By binding the sparse memory resources on queues, all commands that are dependent on the updated bindings are synchronized to only execute after the binding is updated. See the Synchronization and Cache Control chapter for how this synchronization is accomplished.

5.3.6. Queue Destruction

Queues are created along with a logical device during vkCreateDevice. All queues associated with a logical device are destroyed when vkDestroyDevice is called on that device.